XO 1.5 not booting in "pretty boot" mode
lionel at olpc-france.org
lionel at olpc-france.org
Mon Oct 15 15:13:42 EDT 2012
> Can you hook up a serial console to see whats going on with the pretty
boot?
Hi Daniel,
See above the trace extracted from Serial console.
It don't talk to me.
Lionel.
[ 0.604871] system 00:0a: [io 0x0500-0x050f] has been reserved
[ 0.610824] system 00:0a: [mem 0xfed30000-0xfed300ff] has been reserved
[ 0.617484] system 00:0a: [mem 0xfed30000-0xfed30fff] could not be
reserved
[ 0.624495] system 00:0b: [mem 0x00000000-0x0009ffff] could not be
reserved
[ 0.631486] system 00:0b: [mem 0x000e0000-0x000fffff] could not be
reserved
[ 0.638493] system 00:0b: [mem 0x00100000-0x3bffffff] could not be
reserved
[ 0.685247] pci 0000:00:01.0: BAR 6: assigned [mem 0x40000000-0x4000ffff
pref]
[ 0.692522] pci 0000:00:13.0: PCI bridge to [bus 01-01]
[ 0.697793] pci 0000:00:13.0: bridge window [io disabled]
[ 0.703491] pci 0000:00:13.0: bridge window [mem disabled]
[ 0.709183] pci 0000:00:13.0: bridge window [mem pref disabled]
[ 0.715587] NET: Registered protocol family 2
[ 0.720096] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.727896] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.738035] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
[ 0.747211] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.753890] TCP reno registered
[ 0.757256] NET: Registered protocol family 1
[ 0.761851] pci 0000:00:13.0: disabling DAC on VIA PCI bridge
[ 0.767806] Trying to unpack rootfs image as initramfs...
[ 0.797630] Freeing initrd memory: 4020k freed
[ 0.810073] olpc-pm-1.5: GPE = 0x1
[ 0.813781] input: OLPC AC power jack as /devices/virtual/input/input0
[ 0.880632] olpc-pm-1.5: EC manager initialized
[ 0.913619] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.920272] VFS: Disk quotas dquot_6.5.2
[ 0.924280] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.990529] PROM: Built device tree with 39981 bytes of memory.
[ 0.996585] msgmni has been set to 1879
[ 1.001289] modprobe used greatest stack depth: 3016 bytes left
[ 1.009393] io scheduler noop registered
[ 1.013469] io scheduler cfq registered (default)
[ 1.018572] VIA Graphics Intergration Chipset framebuffer 2.4
initializing
[ 1.025629] viafb 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 1.069071] Console: switching to colour frame buffer device 100x40
[ 1.102738] olpc-dcon: Discovered DCON version 2
[ 1.136284] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0D:00/input/input1
[ 1.146486] ACPI: Lid Switch [LID]
[ 1.150421] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.158344] ACPI: Power Button [PWRF]
[ 1.162559] Marking TSC unstable due to TSC halts in idle
[ 1.169059] Non-volatile memory driver v1.3
[ 1.173601] VIA RNG detected
[ 1.176781] Linux agpgart interface v0.103
[ 1.181185] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 1.199823] Switching to clocksource hpet
ΓΏ[ 1.470267] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.492467] brd: module loaded
[ 1.507334] vx855-gpio vx855-gpio: found VX855 PMIO at base 0x420
[ 1.525226] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.543418] ehci_hcd 0000:00:10.4: PCI INT D -> GSI 23 (level, low) ->
IRQ 23
[ 1.562240] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 1.579099] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus
number 1
[ 1.598267] ehci_hcd 0000:00:10.4: debug port 1
[ 1.614301] ehci_hcd 0000:00:10.4: irq 23, io mem 0x80003000
[ 1.650028] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 1.667223] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.685496] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.704134] usb usb1: Product: EHCI Host Controller
[ 1.720282] usb usb1: Manufacturer: Linux
2.6.35.13_xo1.5-20111026.1209.olpc.5d76efb ehci_hcd
[ 1.740423] usb usb1: SerialNumber: 0000:00:10.4
[ 1.756886] hub 1-0:1.0: USB hub found
[ 1.771908] hub 1-0:1.0: 6 ports detected
[ 1.787277] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.805048] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) ->
IRQ 20
[ 1.823612] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 1.840237] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus
number 2
[ 1.859097] uhci_hcd 0000:00:10.0: irq 20, io base 0x00008000
[ 1.876153] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.894189] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.912611] usb usb2: Product: UHCI Host Controller
[ 1.928383] usb usb2: Manufacturer: Linux
2.6.35.13_xo1.5-20111026.1209.olpc.5d76efb uhci_hcd
[ 1.947935] usb usb2: SerialNumber: 0000:00:10.0
[ 1.963937] hub 2-0:1.0: USB hub found
[ 1.978441] hub 2-0:1.0: 2 ports detected
[ 1.993180] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) ->
IRQ 22
[ 2.011107] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 2.026988] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus
number 3
[ 2.045304] uhci_hcd 0000:00:10.1: irq 22, io base 0x00008020
[ 2.062008] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.079740] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.097881] usb usb3: Product: UHCI Host Controller
[ 2.113546] usb usb3: Manufacturer: Linux
2.6.35.13_xo1.5-20111026.1209.olpc.5d76efb uhci_hcd
[ 2.133264] usb usb3: SerialNumber: 0000:00:10.1
[ 2.149285] hub 3-0:1.0: USB hub found
[ 2.163871] hub 3-0:1.0: 2 ports detected
[ 2.178719] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) ->
IRQ 21
[ 2.196805] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 2.212844] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus
number 4
[ 2.231221] uhci_hcd 0000:00:10.2: irq 21, io base 0x00008040
[ 2.248021] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.266004] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.284335] usb usb4: Product: UHCI Host Controller
[ 2.300262] usb usb4: Manufacturer: Linux
2.6.35.13_xo1.5-20111026.1209.olpc.5d76efb uhci_hcd
[ 2.320151] usb usb4: SerialNumber: 0000:00:10.2
[ 2.336213] hub 4-0:1.0: USB hub found
[ 2.350819] hub 4-0:1.0: 2 ports detected
[ 2.365831] Initializing USB Mass Storage driver...
[ 2.381769] usbcore: registered new interface driver usb-storage
[ 2.398749] USB Mass Storage support registered.
[ 2.414317] usbcore: registered new interface driver libusual
[ 2.431127] usbcore: registered new interface driver usbserial
[ 2.447767] USB Serial support registered for generic
[ 2.463625] usbcore: registered new interface driver usbserial_generic
[ 2.480988] usbserial: USB Serial Driver core
[ 2.496288] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[ 2.539372] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.555207] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.571185] rtc_cmos 00:06: RTC can wake from S4
[ 2.586443] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.603273] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 2.640180] Linux video capture interface: v2.00
[ 2.856229] cpuidle: using governor ladder
[ 2.871212] cpuidle: using governor menu
[ 2.885543] sdhci: Secure Digital Host Controller Interface driver
[ 2.902213] sdhci: Copyright(c) Pierre Ossman
[ 2.916995] sdhci-pci 0000:00:0c.0: SDHCI controller found [1106:95d0]
(rev 10)
[ 2.934939] sdhci-pci 0000:00:0c.0: PCI INT A -> GSI 22 (level, low) ->
IRQ 22
[ 2.952833] mmc0: SDHCI controller on PCI [0000:00:0c.0] using DMA
[ 2.969531] mmc1: SDHCI controller on PCI [0000:00:0c.0] using DMA
[ 2.986102] mmc2: SDHCI controller on PCI [0000:00:0c.0] using DMA
[ 3.027040] usbcore: registered new interface driver hiddev
[ 3.042755] usbcore: registered new interface driver usbhid
[ 3.058159] usbhid: USB HID core driver
[ 3.072057] input: EBook Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/XO15EBK:00/input/input3
[ 3.102053] OLPC ACPI:EBook Switch [EBK]
[ 3.122788] HDA Intel 0000:00:14.0: enabling device (0000 -> 0002)
[ 3.139357] HDA Intel 0000:00:14.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 3.156845] HDA Intel 0000:00:14.0: PCI: Disallowing DAC for device
[ 3.173424] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input4
[ 3.294228] ALSA device list:
[ 3.307622] #0: HDA VIA VT82xx at 0x80004000 irq 17
[ 3.323453] TCP bic registered
[ 3.336785] Initializing XFRM netlink socket
[ 3.351514] NET: Registered protocol family 10
[ 3.366543] lo: Disabled Privacy Extensions
[ 3.381158] Mobile IPv6
[ 3.393720] NET: Registered protocol family 17
[ 3.408276] lib80211: common routines for IEEE802.11 drivers
[ 3.424120] Using IPI Shortcut mode
[ 3.766548] Freeing unused kernel memory: 400k freed
[ 3.783582] Write protecting the kernel text: 3148k
[ 3.798766] Write protecting the kernel read-only data: 1056k
[ 3.827707] mount used greatest stack depth: 2932 bytes left
[ 3.864890] mmc1: new SDIO card at address 0001
[ 3.910866] udevd used greatest stack depth: 2792 bytes left
[ 3.926996] udev[57]: starting version 161
[ 3.998566] mmc2: new high speed SDHC card at address f0b2
[ 4.228331] mmcblk0: mmc2:f0b2 SU04G 3.69 GiB
[ 4.261430] mmcblk0: p1 p2
[ 4.630460] blkid used greatest stack depth: 2740 bytes left
[ 5.320390] blkid used greatest stack depth: 2684 bytes left
[ 5.350451] blkid used greatest stack depth: 2680 bytes left
[ 5.595432] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly
filesystem
[ 5.613113] EXT4-fs (mmcblk0p2): write access will be enabled during
recovery
[ 5.983423] EXT4-fs (mmcblk0p2): recovery complete
[ 6.001497] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data
mode. Opts: (null)
[ 6.020255] mount used greatest stack depth: 2192 bytes left
[ 6.049712] dracut: Mounted root filesystem /dev/disk/mmc/mmc2p2
[ 6.071100] EXT4-fs (mmcblk0p2): warning: maximal mount count reached,
running e2fsck is recommended
[ 6.111919] EXT4-fs (mmcblk0p2): re-mounted. Opts: barrier=1,data=ordered
[ 6.142371] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running
e2fsck is recommended
[ 6.163796] EXT4-fs (mmcblk0p1): mounted filesystem without journal.
Opts:
[ 7.267357] dcon_freeze_store: 0
[ 7.270648] dcon_source_switch to CPU
[ 7.302042] olpc-dcon: The CPU has control
[ 7.377988] EXT4-fs (mmcblk0p2): re-mounted. Opts: barrier=1,data=ordered
[ 7.487377] dracut: Switching root
[ 9.387473] udev[250]: starting version 161
[ 10.349702] libertas_sdio: Libertas SDIO driver
[ 10.398424] libertas_sdio: Copyright Pierre Ossman
[ 10.883091] Via camera: serial port is enabled, refusing to load.
[ 10.889592] Specify override_serial=1 to force module loading.
[ 11.209294] hpet1: lost 1 rtc interrupts
[ 12.035035] psmouse.c: detected synaptics, disable synaptics tap-to-click
[ 12.091267] libertas: 20:7c:8f:0f:4a:9d, fw 9.70.20p0, cap 0x000003a3
[ 12.103421] libertas: wlan0: Marvell WLAN 802.11 adapter
[ 12.146349] udev[254]: renamed network interface wlan0 to eth0
[ 12.199519] input: PS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input5
[ 12.294491] mice: PS/2 mouse device common for all mice
[ 13.331722] ip used greatest stack depth: 1736 bytes left
[ 14.501344] EXT4-fs (mmcblk0p2): warning: maximal mount count reached,
running e2fsck is recommended
[ 14.513435] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 15.031688] init: ck-log-system-start main process (648) terminated with
status 1
[ 19.205808] dcon_freeze_store: 1
[ 19.209324] dcon_source_switch to DCON
[ 19.240632] olpc-dcon: The DCON has control
[ 19.282908] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.163051] input: olpc-kbdshim virtual input as
/devices/virtual/input/input6
[ 21.349410] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 22.910475] init: olpc-switchd main process (795) terminated with status
1
[ 22.917932] init: olpc-switchd main process ended, respawning
[ 39.838844] fuse init (API version 7.14)
More information about the Devel
mailing list