XO battery/performance [Devel Digest, Vol 76, Issue 21]

[Yioryos Asprobounitis]

--- On Wed, 7/18/12, Richard Smith <richard at laptop.org> wrote:
> 
> - Start with the XO in a clean working condition. ie remove
> all power
> and battery.
> - Boot the XO. Sugar or OFW either will work.
> - Run on battery and allow the battery to discharge until is
> says its < 90%
> - Connect power and let the battery charge to full.
> - Reboot XO and stop at OFW.
> - ok batman-start
> - ok 0 bg-acr!
> - Verify the ACR is really zero.
> - ok bg-acr@ .bg-acr
> (Should print zero)
> - Remove battery
> (Wait 24 hours, you can do whatever you want with the XO)
> - Boot XO and stop at OFW
> - ok batman-start
> - ok bg-acr@ .bg-acr
> 

At which point exactly the "- insert battery" step goes between "- Remove battery" and "- ok bg-acr@ .bg-acr" ?