connecting serial line to XO-1.75HS

[krishna devarapalli]

On Wed, Jul 11, 2012 at 12:19 AM, James Cameron <quozl at laptop.org> wrote:
> Please follow
> http://wiki.laptop.org/go/Disassembly_top
>
> Remove the screw beneath the green side panels.  Open the antenna.
> Slide the panels up toward the antenna, then lift off sideways.

This is very clear. Thanks James!


>
> There should be little resistance.
>
> Do not remove the casing screws under the battery.
>
> Do not remove the battery lock screws.
>
> On Wed, Jul 11, 2012 at 12:07:34AM -0700, krishna devarapalli wrote:
>> On Tue, Jul 10, 2012 at 11:37 PM, James Cameron <quozl at laptop.org> wrote:
>> > Have you removed all four (4) of these screws?
>> > http://wiki.laptop.org/go/File:Screen_1c.jpg
>>
>> I can find these screws:
>>
>> 1 screw beneath the green encasing, on the white part( the one I am
>> trying to open)
>> 5 screws where the battery sits.
>> 2 screws, one each where the battery is locked.
>>
>> Among these only the first one is relevant?
>> What other screws I need to open?
>> I am not able to figure out from the picture you have pointed.
>>
>> >
>> > On Tue, Jul 10, 2012 at 11:25:13PM -0700, krishna devarapalli wrote:
>> >> I am not able to open the green encasing by pushing the green pin
>> >> inside, to be able to plug-in  the serial line on to XO.
>> >> I am following this link, also other doc'n provided.
>> >> http://wiki.laptop.org/go/Serial_adapters
>> >>
>> >> Please advise.
>> >> _______________________________________________
>> >> Devel mailing list
>> >> Devel at lists.laptop.org
>> >> http://lists.laptop.org/listinfo/devel
>> >
>> > --
>> > James Cameron
>> > http://quozl.linux.org.au/
>
> --
> James Cameron
> http://quozl.linux.org.au/