test /switches

[James Cameron]

On Thu, Sep 22, 2011 at 06:35:06PM -0500, Jerry Vonau wrote:
> On Fri, 2011-09-23 at 08:41 +1000, James Cameron wrote:
> > Compare the manufacturing tags.  The definition of selftest in the
> > /switches vocabulary depends on the values of manufacturing tags.
> > 
> 
> Thanks, that explains the XO-1.5, I was playing with adding the missing
> mfg-tags on replacement motherboards, it's caused by having the TS key
> set to RUNIN. Does the XO-1.75 have this test? The TS key is set to
> SHIP, shouldn't the test return OKAY/FAIL like on the XO-1.5?

No, the "test /switches" test on XO-1.75 does not test the temperature
rise of the CPU.

When Q4B10 is released, a thermal sensor watchdog reset will be
enabled, which will reset and then power down the unit if the CPU
temperature exceeds 85C.  This will occur in OFW or Linux.

"watch-thermal" will be available to display the thermal conditions.

"test-thermal" will be available to test the mechanism by lowering the
threshold temperature to a few degrees above the current CPU
temperature.

-- 
James Cameron
http://quozl.linux.org.au/