booting issue with xo-1.75

[Bert Freudenberg]

On 04.09.2011, at 18:33, carcellelist wrote:

> Dear xo developers,
> 
> i received a xo-175 a few days ago and i got it to partially boot from the uart
> interface with the serial adapter (using "boot" at the firmware "ok" prompt) but i get
> stuck here :
> ...
> [  647.362835] mmc2: no vmmc regulator found
> [  647.370325] mmc2: SDHCI controller on MMC [sdhci-pxa.2] using DMA
> [  647.381468] drivers/usb/core/inode.c: creating file '002'
> [  647.392072] usbcore: registered new interface driver usbhid
> [  647.401205] usbhid: USB HID core driver
> 
> Is anyone experiencing the same issue ? am i missing something during the boot ?

You need to flash a newer firmware. This is explained here:

	http://wiki.laptop.org/go/XO_1.75_11089_Fix

For more info on the XO-1.75, read

	http://wiki.laptop.org/go/XO_1.75_B1

- Bert -