arnd at arndb.de
Mon Mar 14 15:18:29 EDT 2011
On Monday 14 March 2011 19:50:27 John Watlington wrote:
> Cards that are in the state you describe are most likely dead due to
> running out of spare blocks. There is nothing that can be done to
> rehabilitate them, even using the manufacturer's secret code.
> In a disturbing trend, most of the cards I've returned for failure analysis
> in the past year have been worn out (and not just trashed meta-data
> due to a firmware error).
Part of the explanation for this could be the fact that erase block
sizes have rapidly increased. AFAIK, the original XO builtin flash
had 128KB erase blocks, which is also a common size for 1GB SD and
Cards made in 2010 or later typically have erase blocks of 2 MB, and
combine two of them into an allocation unit of 4 MB. This means that
in the worst case (random access over the whole medium), the write
amplification has increased by a factor of 32.
Another effect is that the page size has increased by a factor of 8,
from 2 or 4 KB to 16 or 32 KB. Writing data that as smaller than
a page is more likely to get you into the worst case mentioned
above. This is part of why FAT32 with 32 KB clusters still works
reasonably well, but ext3 with 4 KB blocks has regressed so much.
More information about the Devel