Testing sprase file support for 10.1.3

[forster at ozonline.com.au]

Thanks Jerry
Testing au77
ctrl v will not paste image to Write, no error logged, paste from tool  
bar works ok but does log a warning "got plain filename ... in  
UT_go_file_open"

Think I have seen this before in other OS images

image in clipboard was sourced from Browse using right mouse copy image

Tony



Quoting Jerry Vonau <jvonau at shaw.ca>:

> Hi All:
>
> This is to announce the latest OLPC-AU build for the XO-1.5 for testing
> featuring sparse file support [1], Browse-122, and Musicpainter-9 is
> available for testing [2].
>
> With this release if you don't upgrade the firmware prior to testing you
> will receive a harmless warning at the end of fs-update about writing 1
> block, this is resolved with q3a65 firmware.
>
> This newer firmware is not part of the build as not to trigger an auto
> firmware update on boot for those who don't want the latest firmware.
> For those who wish to use the latest firmware this is available from [3]
> and and the install instructions from [4].
>
> If you want to test this newer firmware but with out going though the
> above routine, you could inject the OLPC-AU security keys using our
> olpc.fth script and install OLPC-AU signed firmware. Download and unzip
> [5] to / on your upgrade media (SD or USB) Download olpc.fth [6]
> to /boot on your upgrade media and place bootfw.zip from [7] into the
> same directory. The upgrade will occur when you boot with your media
> inserted, ensure you have the power adaptor plugged in.
>
> If you plan to use the "4 button upgrade" or NandBlaster (need keys
> installed as above), download to your upgrade media from [2] au77.zd and
> au77.zd.zsp.fs.zip, then rename au77.zd.zsp.fs.zip to fs.zip.
>
> The OLPC-AU menu expects the new image to be named fs.zd. Once you
> transfer au77.zd to your upgrade media, rename it to fs.zd to be able to
> use option 1 or 2 on the menu. The installation of keys and firmware is
> optional, you can use option 1 to install your image, just skip
> unzipping the keys and adding the firmware.
>
> The first boot will install the security keys then reboot, second boot
> will install the newer firmware then reboot, third boot you should have
> the menu screen. Pressing 1 at the menu screen should start flashing the
> XO. Pressing 2 will start NandBlaster, this requires fs.zip to be
> present.
>
> Happy testing,
>
> Jerry
> ps, If I missed a list please forward this email.
>
> [1]http://wiki.laptop.org/go/User:Quozl/fs-update-skip-unused-blocks
> [2]http://build.laptop.org.au/xo/10.1.3/xo-1.5/sparse/
> [3]http://dev.laptop.org/pub/firmware/q3a65/
> [4]http://wiki.laptop.org/go/OLPC_Firmware_q3a65#fs-update_sparse_.zd_files
> [5]http://download.laptop.org.au/XO/F11/10.1.3/keys/pubkeys.zip
> [6]https://dev.laptop.org.au/projects/xo-au/repository/revisions/master/raw/xo-release/olpc.fth
> [7]http://build.laptop.org.au/xo/10.1.3/xo-1.5/q3a65/bootfw.zip
>
>
>
>
> _______________________________________________
> Devel mailing list
> Devel at lists.laptop.org
> http://lists.laptop.org/listinfo/devel
>
> _____________________________________________________
> This mail has been virus scanned by Australia On Line
> see http://www.australiaonline.net.au/mailscanning
>