[OLPC-AU] WLAN failure in 20x XO-1.5s [WAS: Re: NANDblaster failing]

Sridhar Dhanapalan sridhar at laptop.org.au
Tue Feb 15 03:16:18 EST 2011

On 15 February 2011 17:56, James Cameron <quozl at laptop.org> wrote:
> On Tue, Feb 15, 2011 at 03:48:24PM +1100, Sridhar Dhanapalan wrote:
>> After upgrading the Q3A50 one to Q3A62, I get slightly different
>> output from the WLAN test:
>>   SDHCI: Error: ISR = 8000 ESR = 1 Command Timeout,
>>   Command reg: 50a Mode reg: 0 Arg reg: 0
>>   Recent commands (decimal): 0 5
>>   Stopping
>>   Selftest failed due to abort
> Thanks.  The wireless card did not respond to commands.  Normally a card
> will respond to commands.
> Speculation as to cause: (a) open circuit, (b) short circuit, (c)
> damaged card, (d) damaged host.  It would require further analysis
> by Martin.


Is there a chance that it's related to

or is that out of the question?


More information about the Devel mailing list