[Testing] os240py - collaboration over wireless

[Tomeu Vizoso]

On Mon, May 31, 2010 at 15:35, Mikus Grinbergs <mikus at bga.com> wrote:
>> I can only think of two reasons for sharing not working in mesh but
>> presence yes:
>>
>> - network congestion,
>
> In my case, there appear to be no other radio signals present.  If there
> is network congestion, the XOs are generating it themselves.

Would be good to be able to rule that out, but I don't think that's
too probable in your case.

>> - different link-local address setup,
>
> What I found interesting (by hovering over the respective icons in
> Frame), was that the SAME IP-address was assigned when connecting to the
> ad-hoc wireless network as had been assigned (before there was an ad-hoc
> network) when connecting using the mesh icons in Neighborhood View.
>
>>
>> - firewall settings.
>
> In my case, I'm connecting XO-to-XO.  There is no firewall.

I was referring to the local firewall, would be good to be able to
rule out that the iptables firewall wasn't configured correctly on
these images (has happened before).

Regards,

Tomeu

> mikus
>
>
>
>