Mesh network between xo1 and 1.5?

[James Cameron]

On Thu, May 06, 2010 at 01:33:41PM -0400, Martin Langhoff wrote:
> So either get both on the same Access Point, or, if you don't have an
> access point...
> 
>  - On the XO-1.5, use the "create a new network" option you have in
>  the frame
>  - On the XO-1, wait a few seconds - the new network (with the name of
>  the XO-1.5 user) should appear in your network neighbourhood -- join
>  it.

Have you tested this?  I've just tested it and it doesn't work for me.
The ad-hoc network is not shown on the neighbourhood view of the XO-1.

It is, however, shown on the output of "iwlist eth0 scan" on the XO-1,
so it is as if Sugar 0.82 is filtering it.

Test configuration: two XO-1.5 build os123, one XO-1 build 802.

Test method: boot each, "Create new wireless network" on an XO-1.5,
monitor other XOs neighbourhood view.

(Aside; the XO-1.5 shows an icon for olpc-mesh).

-- 
James Cameron
http://quozl.linux.org.au/