B3 with different RAM chips
tiagomnm at gmail.com
Tue Apr 20 20:30:29 EDT 2010
On Tue, Apr 20, 2010 at 8:54 PM, John Watlington <wad at laptop.org> wrote:
> On Apr 19, 2010, at 8:51 PM, Tiago Marques wrote:
> > Hi John,
> > I'm trying out some new USB Flash drives from Sony that are quite
> fast(random write speed) compared to the SD cards shipping in the XO 1.5 and
> I'd just like to ask you something about the test script running on the
> Sandisk Extreme III:
> >  Sandisk Extreme III
> > There are four XOs at 1CC running the tests on a SanDisk Extreme III 4-GB
> SD card. Build 8.2-760 was freshly installed on the laptops.
> > The current test rates are roughly 3.8 sec/test step 4.1, and 4.1
> sec/test step 4.2. This translates roughly into a 17 MByte/s read rate, and
> a 5.7 MByte/s write rate.
> > Laptop Serial # Test Total Written
> > SAN1 SHF725004D1 Wear & Error 30,550
> > SAN2 SHF7250048F Wear & Error 28,335
> > SAN3 SHF80600A54 Wear & Error 28,730
> > SAN4 CSN74902B22 Wear & Error 29,250
> > Am I getting this right? They endured 30TiB of writes and still did ok?
> No, that was 30K cycles (times 20MB/cycle) or just 600 GB.
That's too little :|
On that page it says that "Total Written" represents GiB, not cycles. Is
> > Did they start marking bad blocks as unusable, thus shrinking the drive,
> or did they remained with the same 4GB without failing?
> > What are the results you obtained with the SD cards for XO 1.5 and which
> cards did you settled with?
> An SD card sets aside between 5 and 10% of the raw storage for use in
> fixing bad blocks.
> Thus, you will see no change in the size of the card over time, until it
> runs out of spare blocks
> and fails completely.
I'm asking this because I've ran into the shrinking behavior before, with
which to me seems a better trade-off.
> We didn't settle on "one card", and even if I tell you the manufacturer and
> size it won't help
> as most have various OEM models for a given size.
I see. So you're saying that if you order the same card model and size, you
will still get different FTL and/or NAND?
> > I haven't checked the brand of the sample in my B2 but it's been running
> rock solid as far as I can tell, the only problem is it being so slow with
> random writes because otherwise the 1.5 is quite a capable machine.
> Are you running into the SD card errors on an XO-1 ?
Just on cards I bought after market, either on the XO-1 or 1.5.
Only one SD card from Sandisk has been working perfectly for me, in the
XO-1. I'm looking at ways to test faster USB Flash drives, since the SD card
on the XO 1.5 becomes very slow at times. Installing Linux on an external
HDD is like breathing life into the device, I became very impressed with
performance when I tried it.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Devel