Some testing notes for OS10 for the XO-1

[Philipp Kocher]

Hi Steven

- The scratch sensor board doesn't work (works with build 802)
   I hoped "allow olpc access to ttyUSB nodes" (from release notes os10) 
would make it work. I added an extract of /var/log/messages at the 
bottom of the email.

- timezone can not be changed in gnome since administration menu is 
missing (changing the timezone in sugar control panel has no effect in 
gnome). And talking about time, I think the clock activity is really 
nice and useful.

- build information "OLPC release 11 (Leonidas)" in sugar control panel 
is more confusing than helpful. What about "10 (based on Fedora 11)"?

> Does it boot consistently into Sugar?  Gnome?
Worked fine here.
> Does sound work?
Yes,no problem.
> Can you suspend?  Does it wake up?
Suspend yes, but no proper wake up as mentioned by other testers
(but the shutdown with the power button is really nice and useful).

Regards,
Philipp

Plug in Scratch Sensor board with build 10 on Fedora 11:
Dec 12 07:56:16 xo-11-08-d6 kernel: [   88.687028] usb 1-2: new full
speed USB device using ohci_hcd and address 2
Dec 12 07:56:17 xo-11-08-d6 kernel: [   88.908698] usb 1-2: configura
tion #1 chosen from 1 choice
Dec 12 07:56:17 xo-11-08-d6 kernel: [   89.080490] usbcore: registere
d new interface driver usbserial
Dec 12 07:56:17 xo-11-08-d6 kernel: [   89.080490] USB Serial support
  registered for generic
Dec 12 07:56:17 xo-11-08-d6 kernel: [   89.080490] usbcore: registere
d new interface driver usbserial_generic
Dec 12 07:56:17 xo-11-08-d6 kernel: [   89.080490] usbserial: USB Ser
ial Driver core
Dec 12 07:56:17 xo-11-08-d6 kernel: [   89.162673] USB Serial support
  registered for pl2303
Dec 12 07:56:17 xo-11-08-d6 kernel: [   89.162861] pl2303 1-2:1.0: pl
2303 converter detected
Dec 12 07:56:17 xo-11-08-d6 kernel: [   89.185652] usb 1-2: pl2303 co
nverter now attached to ttyUSB0
Dec 12 07:56:17 xo-11-08-d6 kernel: [   89.185960] usbcore: registere
d new interface driver pl2303
Dec 12 07:56:17 xo-11-08-d6 kernel: [   89.185982] pl2303: Prolific P
L2303 USB to serial adaptor driver
Dec 12 07:56:17 xo-11-08-d6 NetworkManager: <info>  (ttyUSB0): ignori
ng due to lack of mobile broadband capabilties


Plug in Scratch Sensor board with build 802 on Fedora 9:
Dec 13 08:48:55 localhost kernel: [  155.465098] hub_port_wait_reset: 
portstatus=501 portchange=10
Dec 13 08:48:55 localhost kernel: [  155.536006] hub_port_wait_reset: 
portstatus=100 portchange=1
Dec 13 08:48:55 localhost kernel: [  155.539599] hub_port_wait_reset: 
device went away!
Dec 13 08:48:55 localhost kernel: [  155.549596] hub 2-0:1.0: unable to 
enumerate USB device on port 2
Dec 13 08:48:55 localhost kernel: [  155.831725] hub_port_wait_reset: 
portstatus=103 portchange=10
Dec 13 08:48:55 localhost kernel: [  155.904029] usb 1-2: new full speed 
USB device using ohci_hcd and address 4
Dec 13 08:48:55 localhost kernel: [  155.997296] hub_port_wait_reset: 
portstatus=103 portchange=10
Dec 13 08:48:56 localhost kernel: [  156.077180] usb 1-2: configuration 
#1 chosen from 1 choice
Dec 13 08:48:56 localhost kernel: [  156.413019] usbcore: registered new 
interface driver usbserial
Dec 13 08:48:56 localhost kernel: [  156.417722] 
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
Dec 13 08:48:56 localhost kernel: [  156.431937] usbcore: registered new 
interface driver usbserial_generic
Dec 13 08:48:56 localhost kernel: [  156.439535] 
drivers/usb/serial/usb-serial.c: USB Serial Driver core
Dec 13 08:48:56 localhost kernel: [  156.476346] 
drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
Dec 13 08:48:56 localhost kernel: [  156.479963] pl2303 1-2:1.0: pl2303 
converter detected
Dec 13 08:48:56 localhost kernel: [  156.516365] usb 1-2: pl2303 
converter now attached to ttyUSB0
Dec 13 08:48:56 localhost kernel: [  156.522309] usbcore: registered new 
interface driver pl2303
Dec 13 08:48:56 localhost kernel: [  156.536892] 
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver