Test release of multicast NAND updater

[quozl at laptop.org]

Test 3, a different place, B4 acting as sender, five C2 as receiver,
channel 1, four C2 updated fine in one or two passes.

The C2 that I mentioned before is continuing to give trouble.  Same
symptom occurs, usually between 20 and 200 blocks after starting.  Have
tried varying position, channel, temperature, battery presence, remove
all power, USB load, screen brightness, but no change to symptom.  I
suspect something wrong with the unit, but I can't pin it down.

(This same unit when it arrived last week with a prior G1G1 OS build on
it wasn't able to activate wireless.  After I had upgraded it to 757 it
was able to.  That's just additional correlation.)

The unit works fine now after I flashed it with 757 from a USB key.

-- 
James Cameron    mailto:quozl at us.netrek.org     http://quozl.netrek.org/