boot timings
pgf at laptop.org
pgf at laptop.org
Fri Jun 27 15:55:59 EDT 2008
hello --
yesterday, as much for an exercise in using the serial port,
manipulating the kernel commandline, and doing a little
exploring, i resurrected an old tool of mine which timestamps
lines received over a serial port (or a socket), and i used it to
get a trace of XO startup and shutdown.
there's no scientific method here, nor any great conclusions, but
since we don't usually even see the boot logs, i thought i'd pass
along the results, for general interest.
oh -- this was done using build 708, on a unit with the dev key
installed, of course.
paul
=---------------------
paul fox, pgf at laptop.org
0.000| 0.000|Forthmacs
0.000| 1.216|Type 'i' to interrupt stand-init sequence
0.000| 0.000|First stand-init:
0.209| 0.208|Exceptions
0.209| 0.000|CIF
0.209| 0.000|DHCP init
0.209| 0.000|memory node
0.209| 0.000|gpio
0.209| 0.000|Probing memory
0.209| 0.000|MMU
0.209| 0.000|Reclaim dictionary
0.209| 0.000|PCI host bridge
0.209| 0.000|ISA
0.209| 0.000|RTC
0.209| 0.000|CPU nodes
0.209| 0.000|CMOS
0.209| 0.000|Null-NVRAM
0.209| 0.000|board revision
0.209| 0.000|Date to EC
0.240| 0.031|Wireless reset
0.257| 0.016|PCI properties
0.257| 0.000|Manufacturing data
0.257| 0.000|USB setup
0.561| 0.303|Suspend/resume
0.561| 0.000|Century
0.577| 0.015|Init SHA-1 variables
0.577| 0.000|
0.577| 0.000|USB2 devices:
2.241| 1.664|/pci/usb at f,5/wlan at 0,0
2.529| 0.288|USB1 devices:
2.529| 0.000|OLPC C2, 256 MiB memory installed, S/N CSN748056BF
2.685| 0.156|OpenFirmware CL1 Q2D16 Q2D
2.685| 0.000|
2.685| 0.000|Type the Esc key to interrupt automatic startup
2.701| 0.015|5
3.708| 1.006|4 3
5.724| 2.016|2 1
7.740| 2.016| Boot device: /nandflash:\boot\olpc.fth Arguments: Boot device: /nandflash:\boot\olpc.fth Arguments:
15.632| 7.891|Boot device: /pci/nandflash at c:\boot\vmlinuz Arguments: ro root=mtd0 rootfstype=jffs2 console=ttyS0,115200 fbcon=font:SUN12x22Boot device: /pci/nandflash at c:\boot\vmlinuz Arguments: ro root=mtd0 rootfstype=jffs2 console=ttyS0,115200 fbcon=font:SUN12x22
16.609| 0.976|Loading ramdisk image from /pci/nandflash at c:\boot\olpcrd.img ...
21.341| 4.732|[ 0.000000] Linux version 2.6.22-20080523.1.olpc.28f4cb6e780db07 (root at teach) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-27)) #1 PREEMPT Fri May 23 03:06:12 EDT 2008
23.481| 2.139|[ 0.000000] BIOS-provided physical RAM map:
23.481| 0.000|[ 0.000000] BIOS-e801: 0000000000000000 - 000000000009f000 (usable)
23.481| 0.000|[ 0.000000] BIOS-e801: 0000000000100000 - 000000000edfd000 (usable)
23.481| 0.000|[ 0.000000] 237MB LOWMEM available.
23.482| 0.000|[ 0.000000] Zone PFN ranges:
23.482| 0.000|[ 0.000000] DMA 0 -> 4096
23.482| 0.000|[ 0.000000] Normal 4096 -> 60925
23.482| 0.000|[ 0.000000] early_node_map[1] active PFN ranges
23.524| 0.041|[ 0.000000] 0: 0 -> 60925
23.524| 0.000|[ 0.000000] DMI not present or invalid.
23.524| 0.000|[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 0edfd000:f1203000)
23.524| 0.000|[ 0.000000] Built 1 zonelists. Total pages: 60450
23.524| 0.000|[ 0.000000] Kernel command line: ro root=mtd0 rootfstype=jffs2 console=ttyS0,115200 fbcon=font:SUN12x22
23.525| 0.000|[ 0.000000] Initializing CPU#0
23.525| 0.000|[ 0.000000] CPU 0 irqstacks, hard=c0714000 soft=c0713000
23.525| 0.000|[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
23.567| 0.041|[ 0.000000] Detected 431.221 MHz processor.
23.567| 0.000|[ 23.150198] Console: colour EGA 80x25
23.567| 0.000|[ 23.150328] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
23.567| 0.000|[ 23.150936] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
23.567| 0.000|[ 23.188408] Memory: 228104k/243700k available (2142k kernel code, 15040k reserved, 810k data, 168k init, 0k highmem)
23.568| 0.000|[ 23.188473] virtual kernel memory layout:
23.568| 0.000|[ 23.188483] fixmap : 0xffffd000 - 0xfffff000 ( 8 kB)
23.611| 0.042|[ 23.188496] vmalloc : 0xcf800000 - 0xffffb000 ( 775 MB)
23.611| 0.000|[ 23.188508] lowmem : 0xc0000000 - 0xcedfd000 ( 237 MB)
23.611| 0.000|[ 23.188520] .init : 0xc06e4000 - 0xc070e000 ( 168 kB)
23.611| 0.000|[ 23.188533] .data : 0xc06178ae - 0xc06e21b4 ( 810 kB)
23.611| 0.000|[ 23.188545] .text : 0xc0400000 - 0xc06178ae (2142 kB)
23.612| 0.000|[ 23.188575] Checking if this processor honours the WP bit even in supervisor mode... Ok.
23.612| 0.000|[ 23.339364] Calibrating delay using timer specific routine.. 863.54 BogoMIPS (lpj=4317730)
23.654| 0.041|[ 23.339627] Security Framework v1.0.0 initialized
23.654| 0.000|[ 23.339658] Capability LSM initialized
23.654| 0.000|[ 23.339772] Mount-cache hash table entries: 512
23.654| 0.000|[ 23.340331] CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
23.654| 0.000|[ 23.340354] CPU: L2 Cache: 128K (32 bytes/line)
23.655| 0.000|[ 23.340428] Compat vDSO mapped to ffffe000.
23.655| 0.000|[ 23.340458] CPU: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02
23.655| 0.000|[ 23.340492] Checking 'hlt' instruction... OK.
23.697| 0.041|[ 23.380308] NET: Registered protocol family 16
23.697| 0.000|[ 23.380363] geode-mfgpt: Registered timer 0
23.697| 0.000|[ 23.380398] mfgpt-timer: registering the MFGT timer as a clock event.
23.697| 0.000|[ 23.380778] geode-mfgpt: 8 timers available.
23.697| 0.000|[ 23.380970] OLPC board with OpenFirmware: CL1 Q2D16 Q2D
23.697| 0.000|[ 23.392239] OLPC board revision: C2 (EC=52)
23.698| 0.000|[ 23.393799] PCI: Using configuration type OLPC
23.698| 0.000|[ 23.393817] Setting up standard PCI resources
23.698| 0.000|[ 23.400281] SCSI subsystem initialized
23.698| 0.000|[ 23.400622] usbcore: registered new interface driver usbfs
23.740| 0.041|[ 23.400817] usbcore: registered new interface driver hub
23.740| 0.000|[ 23.401037] usbcore: registered new device driver usb
23.740| 0.000|[ 23.401361] PCI: Probing PCI hardware
23.740| 0.000|[ 23.407307] NET: Registered protocol family 2
23.740| 0.000|[ 23.411809] Time: tsc clocksource has been installed.
23.741| 0.000|[ 23.412079] Switched to high resolution mode on CPU 0
23.741| 0.000|[ 23.485182] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
23.741| 0.000|[ 23.485440] TCP established hash table entries: 8192 (order: 5, 163840 bytes)
23.783| 0.041|[ 23.485969] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
23.783| 0.000|[ 23.486587] TCP: Hash tables configured (established 8192 bind 8192)
23.783| 0.000|[ 23.486607] TCP reno registered
23.783| 0.000|[ 23.513083] checking if image is initramfs... it is
23.783| 0.000|[ 23.625471] Freeing initrd memory: 9401k freed
23.784| 0.000|[ 23.698504] input: OLPC PM as /class/input/input0
23.784| 0.000|[ 23.706728] input: OLPC lid switch as /class/input/input1
23.784| 0.000|[ 23.714961] input: OLPC ebook switch as /class/input/input2
23.826| 0.041|[ 23.714986] SCI is mapped to IRQ 3
23.826| 0.000|[ 23.715014] Set IRQ 3 for 6
23.826| 0.000|[ 23.715100] Set IRQ 3 for 7
23.826| 0.000|[ 23.768257] Total HugeTLB memory allocated, 0
23.826| 0.000|[ 23.768637] VFS: Disk quotas dquot_6.5.1
23.826| 0.000|[ 23.768702] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
23.826| 0.000|[ 23.769124] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
23.827| 0.000|[ 23.868720] PROM: Built device tree with 36534 bytes of memory.
23.827| 0.000|[ 23.868914] io scheduler noop registered
23.827| 0.000|[ 23.869009] io scheduler cfq registered (default)
23.870| 0.042|[ 23.893814] lxfb 0000:00:01.1: 16384 KB of video memory at 0xfd000000
23.870| 0.000|[ 23.975473] Console: switching to colour frame buffer device 100x40
23.870| 0.000|[ 24.021220] fb0: Geode LX frame buffer device
23.870| 0.000|[ 24.594524] Non-volatile memory driver v1.2
23.870| 0.000|[ 24.594560] AMD Geode RNG detected
23.871| 0.000|[ 24.614659] Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing enabled
23.871| 0.000|[ 24.639094] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
23.871| 0.000|[ 25.083836] serial8250 serial8250.0: unable to register port at index 1 (IO2f8 MEM0 IRQ3): -28
23.907| 0.035|[ 25.092649] serial8250 serial8250.0: unable to register port at index 2 (IO3e8 MEM0 IRQ4): -28
23.907| 0.000|[ 25.101433] serial8250 serial8250.0: unable to register port at index 3 (IO2e8 MEM0 IRQ3): -28
23.907| 0.000|[ 25.247865] RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
24.070| 0.162|[ 25.258741] Linux video capture interface: v2.00
24.070| 0.000|[ 25.263526] Marvell M88ALP01 'CAFE' Camera Controller version 2
24.070| 0.000|[ 25.280567] PCI: Enabling device 0000:00:0c.2 (0000 -> 0002)
24.086| 0.015|[ 25.316059] i2c-adapter i2c-0: SMBus Quick command not supported, can't probe for chips
24.129| 0.043|[ 25.324298] olpc-dcon: No DCON found on SMBus
24.129| 0.000|[ 25.372763] OmniVision ov7670 sensor driver, at your service
24.177| 0.047|[ 25.752466] NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix NAND 512MiB 3,3V 8-bit)
24.617| 0.440|[ 25.761081] 2 NAND chips detected
24.617| 0.000|[ 25.765911] Searching for RedBoot partition table in NAND 512MiB 3,3V 8-bit at offset 0xfd80000
24.617| 0.000|[ 25.781377] No RedBoot partition table detected in NAND 512MiB 3,3V 8-bit
24.618| 0.000|[ 25.796472] ehci_hcd 0000:00:0f.5: EHCI Host Controller
24.618| 0.000|[ 25.809876] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
24.618| 0.000|[ 25.847212] ehci_hcd 0000:00:0f.5: irq 10, io mem 0xfe01b000
24.688| 0.069|[ 25.852893] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
24.688| 0.000|[ 25.870107] usb usb1: configuration #1 chosen from 1 choice
24.688| 0.000|[ 25.883396] hub 1-0:1.0: USB hub found
24.688| 0.000|[ 25.887196] hub 1-0:1.0: 4 ports detected
24.689| 0.000|[ 26.014152] ohci_hcd 0000:00:0f.4: OHCI Host Controller
24.843| 0.154|[ 26.027577] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
24.844| 0.000|[ 26.035177] ohci_hcd 0000:00:0f.4: irq 10, io mem 0xfe01a000
24.844| 0.000|[ 26.134589] usb usb2: configuration #1 chosen from 1 choice
24.954| 0.109|[ 26.147118] hub 2-0:1.0: USB hub found
24.954| 0.000|[ 26.150922] hub 2-0:1.0: 4 ports detected
24.954| 0.000|[ 26.227211] hub_port_wait_reset: portstatus=503 portchange=10
25.035| 0.080|[ 26.267534] Initializing USB Mass Storage driver...
25.066| 0.031|[ 26.287584] usb 1-1: new high speed USB device using ehci_hcd and address 2
25.095| 0.029|[ 26.356937] hub_port_wait_reset: portstatus=503 portchange=10
25.164| 0.069|[ 26.454186] usb 1-1: configuration #1 chosen from 1 choice
25.260| 0.095|[ 26.485044] usbcore: registered new interface driver usb-storage
25.313| 0.052|[ 26.491224] USB Mass Storage support registered.
25.313| 0.000|[ 26.504211] usbcore: registered new interface driver libusual
25.313| 0.000|[ 26.568650] serio: i8042 KBD port at 0x60,0x64 irq 1
25.380| 0.066|[ 26.573967] serio: i8042 AUX port at 0x60,0x64 irq 12
25.380| 0.000|[ 26.679928] input: AT Translated Set 2 keyboard as /class/input/input3
25.487| 0.107|[ 26.723029] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
25.530| 0.042|[ 26.729564] rtc0: alarms up to one year, y3k
25.530| 0.000|[ 27.227525] drivers/input/mouse/olpc.c: OLPC touchpad revision 0x50.
26.035| 0.504|[ 27.716365] drivers/input/mouse/olpc.c: OLPC touchpad revision 0x50.
26.523| 0.488|[ 27.844614] input: OLPC ALPS GlideSensor as /class/input/input4
26.651| 0.127|[ 27.904174] input: OLPC ALPS PenTablet as /class/input/input5
26.711| 0.060|[ 27.928915] olpc-dcon: Discovered DCON version 2
26.736| 0.024|[ 27.933803] Set IRQ 6 for 2
26.736| 0.000|[ 28.298217] sdhci: Secure Digital Host Controller Interface driver
27.134| 0.397|[ 28.304520] sdhci: Copyright(c) Pierre Ossman
27.134| 0.000|[ 28.317075] sdhci: SDHCI controller found at 0000:00:0c.1 [11ab:4101] (rev 10)
27.134| 0.000|[ 28.324439] PCI: Enabling device 0000:00:0c.1 (0000 -> 0002)
27.135| 0.000|[ 28.330125] sdhci: Invalid iomem size. You may experience problems.
27.135| 0.000|[ 28.351054] mmc0: SDHCI at 0xfe024000 irq 11 DMA
27.150| 0.015|[ 28.366124] geode-aes: GEODE AES engine enabled.
27.166| 0.015|[ 28.381767] usbcore: registered new interface driver hiddev
27.214| 0.048|[ 28.395715] usbcore: registered new interface driver usbhid
27.214| 0.000|[ 28.401441] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
27.214| 0.000|[ 28.407826] Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC).
27.215| 0.000|[ 28.437160] Failure reading codec reg 0x7e,Last value=0x7e805368
27.250| 0.035|[ 28.443428] Failure reading codec reg 0x7e,Last value=0x7e805368
27.250| 0.000|[ 28.508418] ALSA device list:
27.298| 0.047|[ 28.511411] #0: CS5535 Audio cs5535audio at 0x1480, irq 5
27.345| 0.047|[ 28.517997] TCP bic registered
27.345| 0.000|[ 28.521069] Initializing XFRM netlink socket
27.345| 0.000|[ 28.525533] NET: Registered protocol family 1
27.345| 0.000|[ 28.530148] NET: Registered protocol family 10
27.346| 0.000|[ 28.535024] lo: Disabled Privacy Extensions
27.346| 0.000|[ 28.539283] Mobile IPv6
27.346| 0.000|[ 28.541872] NET: Registered protocol family 17
27.346| 0.000|[ 28.546329] Using IPI Shortcut mode
27.346| 0.000|[ 28.550611] Freeing unused kernel memory: 168k freed
27.346| 0.000|[ 28.555657] Write protecting the kernel read-only data: 624k
27.360| 0.013|Hello, (children of the) world!
28.592| 1.232|[ 34.514604] JFFS2 notice: (611) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
33.330| 4.737|
34.722| 1.391|INIT: version 2.86 booting
34.770| 0.048| Welcome to Fedora
36.306| 1.536| Press 'I' to enter interactive startup.
36.322| 0.016|Setting clock (utc): Thu Jun 26 21:22:15 GMT 2008 [ OK ]
37.905| 1.583|
38.289| 0.383|Starting udev: [ OK ]
43.952| 5.663|Loading default keymap (us): [ OK ]
45.361| 1.408|
45.553| 0.191|Setting hostname localhost.localdomain: [ OK ]
45.569| 0.016|Checking filesystems
46.353| 0.784|Checking all file systems.
46.370| 0.017|[ OK ]
46.370| 0.000|
46.882| 0.511|Mounting local filesystems: [ OK ]
46.913| 0.030|Enabling /etc/fstab swaps: [ OK ]
47.377| 0.464|
47.809| 0.432|INIT: Entering runlevel: 5
47.857| 0.047|Entering non-interactive startup
47.970| 0.113|Starting 0-boot-anim-start: [ OK ]
48.321| 0.350|
48.513| 0.191|Starting olpc-configure: olpc-configure: configuring hardware...
48.625| 0.112|[ OK ]
48.625| 0.000|Starting system logger: [ OK ]
49.634| 1.009|
49.634| 0.000|Starting kernel logger: [ OK ]
49.664| 0.029|Starting system message bus: Unknown username "gdm" in message bus configuration file
50.576| 0.912|[ OK ]
50.576| 0.000|
51.152| 0.575|Starting rainbow-daemon: [ OK ]
53.936| 2.784|Starting sshd: [ OK ]
54.464| 0.528|
54.754| 0.289|Starting ConsoleKit: [ OK ]
54.818| 0.064|Starting crond: [ OK ]
55.199| 0.381|[ OK ]
55.199| 0.000|Starting anacron: [ OK ]
55.535| 0.335|
55.839| 0.304|Starting Avahi daemon... [ OK ]
55.999| 0.160|Setting network parameters...
56.320| 0.320|Starting NetworkManager daemon: [ OK ]
56.527| 0.207|
56.832| 0.304|Starting NetworkManagerDispatcher daemon: [ OK ]
56.864| 0.032|Starting HAL daemon: [ OK ]
57.488| 0.624|
58.016| 0.528|Starting the hardware manager: [ OK ]
59.600| 1.584|Starting Open Hardware Manager: [ OK ]
60.464| 0.864|
61.023| 0.559|Starting ul-warning: [ OK ]
61.327| 0.304|Starting z-boot-anim-stop: [ OK ]
64.031| 2.704|
64.975| 0.944|
65.585| 0.610|X.Org X Server 1.4.0Release Date: 5 September 2007
65.586| 0.000|X Protocol Version 11, Revision 0Build Operating System: Fedora Core 7 Red Hat, Inc.
65.586| 0.000|Current Operating System: Linux xo-10-B4-EC.localdomain 2.6.22-20080523.1.olpc.28f4cb6e780db07 #1 PREEMPT Fri May 23 03:06:12 EDT 2008 i586Build Date: 27 May 2008 08:43:14PM
65.586| 0.000|Build ID: xorg-x11-server 1.4-9.olpc2 Before reporting problems, check http://wiki.x.org
65.586| 0.000| to make sure that you have the latest version.Module Loader present
65.587| 0.000|Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational,
65.623| 0.035| (WW) warning, (EE) error, (NI) not implemented, (??) unknown.(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 26 21:22:42 2008
65.623| 0.000|(==) Using config file: "/etc/X11/xorg.conf"(EE) Failed to load module "dbe" (module does not exist, 0)
65.821| 0.197|(EE) Failed to load module "glx" (module does not exist, 0)(EE) Failed to load module "dri" (module does not exist, 0)
66.028| 0.207|(II) Module "ramdac" already built-in(EE) OLPC ALPS PenTablet: Button: 74.
66.554| 0.525|(EE) OLPC ALPS PenTablet: state->btn: 0x8237800.(EE) OLPC ALPS PenTablet: Unable to parse 'null' as a map specifier string.
66.554| 0.000|(EE) OLPC ALPS PenTablet: Unable to parse 'null' as a map specifier string.(EE) OLPC ALPS GlideSensor: Unable to parse 'RelAxis 0' as a map specifier.
66.554| 0.000|(EE) OLPC ALPS GlideSensor: Unable to parse 'RelAxis 1' as a map specifier.(EE) OLPC ALPS GlideSensor: Button: 74.
66.555| 0.000|(EE) OLPC ALPS GlideSensor: state->btn: 0x823a260.(EE) OLPC ALPS GlideSensor: Unable to parse 'null' as a map specifier string.
66.580| 0.024|(EE) OLPC ALPS GlideSensor: Unable to parse 'null' as a map specifier string.Xlib: extension "XFree86-Misc" missing on display ":0.0".
69.941| 3.361|The XKEYBOARD keymap compiler (xkbcomp) reports:> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
69.941| 0.000|> Ignoring extra symbolsErrors from xkbcomp are not fatal to the X server
105.282| 35.340|
[ hit return to enable shell on ttyS0 -pgf ]
105.314| 0.032|bash-3.2#
105.474| 0.160|bash-3.2#
121.361| 15.886|bash-3.2#
[ shutdown commenced from suger, with timestamps reset -pgf ]
121.376| 0.015|bash-3.2# INIT: Switching to run
0.000| 12.012|INIT: Sending processes the TERM signal
0.000| 0.000|
0.000| 0.000|
0.000| 0.000|waiting for X server to shut down
0.992| 0.991|
0.992| 0.000|xinit: unexpected signal 15.
1.008| 0.016|Stopping ul-warning: Traceback (most recent call last):
2.053| 1.045| File "/etc/rc0.d/K01ul-warning", line 94, in <module>
2.053| 0.000| fb = initial_setup()
2.053| 0.000| File "/etc/rc0.d/K01ul-warning", line 35, in initial_setup
2.053| 0.000| chvt(2)
2.053| 0.000| File "pyvt.pyx", line 42, in pyvt.chvt
2.053| 0.000|IOError: [Errno 22] Invalid argument
2.054| 0.000|[FAILED]
2.325| 0.271|
2.469| 0.144|Stopping NetworkManager daemon: [ OK ]
3.653| 1.184|Stopping NetworkManagerDispatcher daemon: [ OK ]
3.813| 0.159|
3.941| 0.128|Shutting down Avahi daemon: [ OK ]
3.973| 0.032|Stopping HAL daemon: [ OK ]
4.117| 0.143|
4.261| 0.144|Stopping Open Hardware Manager: [ OK ]
4.309| 0.048|Stopping the hardware manager: [ OK ]
4.581| 0.272|
4.757| 0.176|Stopping ConsoleKit: [ OK ]
4.757| 0.000|Stopping sshd: [ OK ]
5.077| 0.319|
5.221| 0.144|Stopping rainbow-daemon: [ OK ]
5.285| 0.063|Stopping crond: [ OK ]
5.509| 0.224|
5.621| 0.111|Stopping system message bus: [ OK ]
5.621| 0.000|Shutting down kernel logger: [ OK ]
6.869| 1.248|
6.869| 0.000|Shutting down system logger: [ OK ]
6.997| 0.127|Starting killall: Traceback (most recent call last):
7.404| 0.407| File "/etc/init.d/ul-warning", line 94, in <module>
7.404| 0.000| fb = initial_setup()
7.404| 0.000| File "/etc/init.d/ul-warning", line 35, in initial_setup
7.405| 0.000| chvt(2)
7.405| 0.000| File "pyvt.pyx", line 42, in pyvt.chvt
7.405| 0.000|IOError: [Errno 22] Invalid argument
7.405| 0.000|[FAILED]
7.596| 0.191|
7.851| 0.255|Sending all processes the TERM signal...
12.876| 5.024|Sending all processes the KILL signal...
12.908| 0.031|Saving mixer settings
13.260| 0.352|Saving random seed:
13.276| 0.015|Syncing hardware clock to system time
14.123| 0.847|Unmounting file systems: umount2: Invalid argument
14.155| 0.031|umount: /security/.private: not mounted
14.155| 0.000|
16.203| 2.048|Cannot stat /security/.private: No such file or directory
16.229| 0.026|Cannot stat /security/.private: No such file or directory
16.229| 0.000|Cannot stat /security/.private: No such file or directory
21.220| 4.991|Unmounting file systems (retry): umount2: No such file or directory
22.164| 0.944|umount: /security/.private: not found
22.165| 0.000|
24.216| 2.051|Cannot stat /security/.private: No such file or directory
24.216| 0.000|Cannot stat /security/.private: No such file or directory
24.216| 0.000|Cannot stat /security/.private: No such file or directory
29.207| 4.991|Unmounting file systems (retry): umount2: No such file or directory
29.233| 0.026|umount: /security/.private: not found
29.233| 0.000|
31.282| 2.048|Cannot stat /security/.private: No such file or directory
31.282| 0.000|Cannot stat /security/.private: No such file or directory
31.283| 0.000|Cannot stat /security/.private: No such file or directory
36.349| 5.066|umount2: No such file or directory
36.349| 0.000|umount: /security/.private: not found
36.413| 0.063|mount: / not mounted already, or bad option
36.429| 0.016|Halting system...
39.437| 3.008|[ 173.985843] Power down.
39.437| 0.000|[ 173.988307] OLPC power off sequence...
More information about the Devel
mailing list