Testing the Wireless driver changes

[David Woodhouse]

On Fri, 2008-01-18 at 15:50 -0500, Michail Bletsas wrote:
> > Ideally, we want to just kill the auto-mesh-repeater mode, where boot2
> > times out after 5 seconds and loads the firmware from the internal flash
> > (which is obviously larger on these devices than on the XO). Can we
> > achieve that just by updating to a 'normal' Boot2 version from the XO?
> > 
> Yes, that is all that is needed to disable autoboot on the active 
> antennas.

OK, that's the plan for the Mongolia deployment then. Wad, please can
you confirm (with libertas-flash.py) and forward me the current (XO)
version of Boot2, so I can do that?

Thanks.

-- 
dwmw2