[PATCH] OLPC rtc-cmos support

[Marcelo Tosatti]

On Sun, Jul 08, 2007 at 12:10:50PM -0700, David Brownell wrote:
> On Sunday 08 July 2007, Marcelo Tosatti wrote:
> 
> > Like this? 
> 
> Not quite ...
> 
> 
> > +struct resource rtc_platform_irq = {
> > +	.flags = IORESOURCE_IRQ,
> > +	.start = 8,
> > +	.end = 8,
> > +};
> 
> Unused, right?
> 
> 
> > +static int olpc_rtc_init(void)
> 
> ... should be marked __init ...
> 
> > +{
> > +	rtc_info.rtc_day_alarm = 0;
> > +	rtc_info.rtc_mon_alarm = 0;
> > +	rtc_info.rtc_century = 0;
> > +	rtc_info.wake_on = rtc_wake_on;
> > +	rtc_info.wake_off = rtc_wake_off;
> 
> ... that can all just be static init ...
> 
> > +
> > +	(void)platform_device_register(&olpc_rtc_device);
> > +
> > +	device_init_wakeup(&olpc_rtc_device.dev, 1);
> 
> ... do the init_wakeup before registering the device, so
> there can never be confusion about whether a probe() will
> see that part of device config ...

For some reason doing things in that order causes wake_on/wake_off
to not be called...

Thanks again for the comments.


diff --git a/arch/i386/kernel/olpc-pm.c b/arch/i386/kernel/olpc-pm.c
index 9599dbe..474be1a 100644
--- a/arch/i386/kernel/olpc-pm.c
+++ b/arch/i386/kernel/olpc-pm.c
@@ -11,6 +11,9 @@ #include <linux/delay.h>
 #include <linux/input.h>
 #include <linux/suspend.h>
 #include <linux/bootmem.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/mc146818rtc.h>
 #include <asm/io.h>
 
 #include <asm/olpc.h>
@@ -272,6 +275,8 @@ static int olpc_pm_enter(suspend_state_t
 	return 0;
 }
 
+static u16 olpc_wakeup_mask = CS5536_PM_PWRBTN;
+
 int asmlinkage olpc_do_sleep(u8 sleep_state)
 {
 	void *pgd_addr = __va(read_cr3());
@@ -282,7 +287,7 @@ int asmlinkage olpc_do_sleep(u8 sleep_st
 
 	/* FIXME:  Set any other SCI events that we might want here */
 
-	outl((CS5536_PM_PWRBTN << 16) | 0xFFFF, acpi_base + PM1_STS);
+	outl((olpc_wakeup_mask << 16) | 0xFFFF, acpi_base + PM1_STS);
 
 	/* If we are in test mode, then just return (simulate a successful
 	   suspend/resume).  Otherwise, if we are doing the real thing,
@@ -549,6 +554,59 @@ static int __init olpc_pm_init(void)
 	return 0;
 }
 
+
+#if defined (CONFIG_RTC_DRV_CMOS) || defined (CONFIG_RTC_DRV_CMOS_MODULE)
+struct resource rtc_platform_resource[2] = {
+	{
+		.flags		= IORESOURCE_IO,
+		.start		= RTC_PORT(0),
+		.end		= RTC_PORT(0) + RTC_IO_EXTENT
+	},
+	{
+		.flags = IORESOURCE_IRQ,
+		.start = 8,
+		.end = 8,
+	},
+};
+
+
+static void rtc_wake_on(struct device *dev)
+{
+	olpc_wakeup_mask |= CS5536_PM_RTC;
+}
+
+static void rtc_wake_off(struct device *dev)
+{
+	olpc_wakeup_mask &= ~(CS5536_PM_RTC);
+}
+
+static struct cmos_rtc_board_info rtc_info = {
+	.rtc_day_alarm = 0,
+	.rtc_mon_alarm = 0,
+	.rtc_century = 0,
+	.wake_on = rtc_wake_on,
+	.wake_off = rtc_wake_off,
+};
+
+struct platform_device olpc_rtc_device = {
+	.name = "rtc_cmos",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(rtc_platform_resource),
+	.dev.platform_data = &rtc_info,
+	.resource = rtc_platform_resource,
+};
+
+static int __init olpc_rtc_init(void)
+{
+	(void)platform_device_register(&olpc_rtc_device);
+
+	device_init_wakeup(&olpc_rtc_device.dev, 1);
+
+	return 0;
+}
+arch_initcall(olpc_rtc_init);
+#endif /* CONFIG_RTC_DRV_CMOS */
+
 static void olpc_pm_exit(void)
 {
 	/* Clear any pending events, and disable them */