Startup problems

[Hal Murray]

cjb at laptop.org said:
> The "disk label package" refers to the partition table's label for the
> filesystem -- as Hal says, you should check that the label matches the
> filesystem type you have on the disk. 

The setup that works for me doesn't have any partitions.

>From fdisk's "p" command:

  Command (m for help): p

  Disk /dev/sdd1: 998 MB, 998793216 bytes
  31 heads, 62 sectors/track, 1014 cylinders
  Units = cylinders of 1922 * 512 = 984064 bytes

       Device Boot      Start         End      Blocks   Id  System

  Command (m for help):


-- 
These are my opinions, not necessarily my employer's.  I hate spam.