MPP port selection
dcbw at redhat.com
Sun Apr 1 23:53:51 EDT 2007
On Sun, 2007-04-01 at 12:07 -0700, Luis Carlos Cobo Rus wrote:
> On 3/31/07, Dan Williams <dcbw at redhat.com> wrote:
> > On Sat, 2007-03-31 at 21:07 -0700, Luis Carlos Cobo Rus wrote:
> > > Hi John,
> > >
> > > there's nothing special about the port or anycast IP, we only need
> > > them to be consistent between MPPs and clients.
> Actually, the anycast IP has to be in the same subnet as the IPs on
> the mesh, or it won't be sent through the mesh interface. Another
> option is to set a explicit route for this (route add
> mpp_anycast_address msh0 on the clients).
I do this in NetworkManager since the clients are using IPv4
More information about the Devel