No luck at SPI reflash

Mitch Bradley wmb at firmworks.com
Sun Oct 29 15:04:56 EST 2006


We have been having a lot of problems with this procedure lately.  It 
works flawlessly on my system, but seems to die for everyone else.

I have usually been able to walk people through some mitigation 
procedures, though.  Can you go on IRC?  #olpc  .  If so, I can take you 
through it the hard way.

Mitch


Pierre Ossman wrote:
> Hi guys,
>
> I gave the SPI emergency reflash a go. Unfortunately, not even that is
> working on my board:
>
> SPI FLASH recovery program version 2.2.
> Complete instructions at http://wiki.laptop.org/go/SPI_FLASH_Recovery
> Command summary:
>
> line /dev/ttySn    \ Set the serial port to device
>    If you omit this command, the default port is /dev/ttyS0
>
> flash filename     \ Programs the FLASH from the named file
> verify             \ Verifies the FLASH
>
> Verification over the serial line is slow (17 minutes)
> so you might want to skip it and let the
> loaded image verify itself upon booting.
>
> ok flash ../linuxbios-Q2A11.rom
> Reading ../linuxbios-Q2A11.rom
> Read FLASH image file into memory
> Unsupported SPI FLASH IDa7
> ok flash ../linuxbios-Q2A11.rom
> Reading ../linuxbios-Q2A11.rom
> Read FLASH image file into memory
> Unsupported SPI FLASH IDb7
> ok flash ../linuxbios-Q2A11.rom
> Reading ../linuxbios-Q2A11.rom
> Read FLASH image file into memory
> Unsupported SPI FLASH IDb0
> ok flash ../linuxbios-Q2A11.rom
> Reading ../linuxbios-Q2A11.rom
> Read FLASH image file into memory
> Unsupported SPI FLASH IDac
> ok flash ../linuxbios-Q2A11.rom
> Reading ../linuxbios-Q2A11.rom
> Read FLASH image file into memory
> Unsupported SPI FLASH IDb1
> ok flash ../linuxbios-Q2A11.rom
> Reading ../linuxbios-Q2A11.rom
> Read FLASH image file into memory
> Unsupported SPI FLASH IDb0
> ok flash ../linuxbios-Q2A11.rom
> Reading ../linuxbios-Q2A11.rom
> Read FLASH image file into memory
> Unsupported SPI FLASH IDac
> ok flash ../linuxbios-Q2A11.rom
> Reading ../linuxbios-Q2A11.rom
> Read FLASH image file into memory
> Unsupported SPI FLASH ID87
> ok flash ../linuxbios-Q2A11.rom
> Reading ../linuxbios-Q2A11.rom
> Read FLASH image file into memory
> Unsupported SPI FLASH IDb7
>
> Looks like some interference somewhere. The board should be grounded
> through the serial cable and the monitor.
>
> Ideas?
>
> Rgds
> Pierre
>   



More information about the Devel mailing list