[OLPC-devel] Build image 76.

[Richard Smith]

>    > Its hooked up to GPIO18 on the EC.  So enable that output and
>    > wireless should come back.
>
> From a quick look, it seems that GPIO18 was already enabled and
> toggling it doesn't make the device come up.  I could be doing
> something wrong, or this might not be where our problem is.

I just checked L21 and it had 3.3V on it so... Rats.  Thats not it.

What about P4 USB is it enabled?

-- 
Richard A. Smith