[PATCH] gxfb: Fixups for the AMD Geode GX framebuffer driver
Jordan Crouse
jordan.crouse at amd.unroutablecom
Sun Dec 24 04:29:34 EST 2006
Commit: f378819a19e2b9639f17a1a82c5e12adc9512390
Parent: 4c1979c8963528cc6f52203ae62162ed22e171f4
commit f378819a19e2b9639f17a1a82c5e12adc9512390
Author: Jordan Crouse <jordan.crouse at amd.com>
AuthorDate: Fri Dec 8 02:40:53 2006 -0800
Commit: Linus Torvalds <torvalds at woody.osdl.org>
CommitDate: Fri Dec 8 08:29:08 2006 -0800
[PATCH] gxfb: Fixups for the AMD Geode GX framebuffer driver
We cannot assume that the BIOS will be correctly setting up the hardware, so
set some bits in various display registers to enable video output. Allow an
advanced user to specify a frambuffer size, rather then probing the BIOS. All
of these fixes were prompted by the OLPC effort.
[akpm at osdl.org: cleanups]
Signed-off-by: Jordan Crouse <jordan.crouse at amd.com>
Cc: "Antonino A. Daplas" <adaplas at pol.net>
Acked-by: James Simmons <jsimmons at infradead.org>
Signed-off-by: Andrew Morton <akpm at osdl.org>
Signed-off-by: Linus Torvalds <torvalds at osdl.org>
---
drivers/video/geode/Kconfig | 20 ++++++++++++++++++++
drivers/video/geode/display_gx.c | 8 ++++++++
drivers/video/geode/display_gx.h | 1 +
drivers/video/geode/gxfb_core.c | 6 ++++++
drivers/video/geode/video_gx.c | 24 +++++++++++++++++++++++-
drivers/video/geode/video_gx.h | 7 +++++++
6 files changed, 65 insertions(+), 1 deletions(-)
diff --git a/drivers/video/geode/Kconfig b/drivers/video/geode/Kconfig
index 4e173ef..a814b6c 100644
--- a/drivers/video/geode/Kconfig
+++ b/drivers/video/geode/Kconfig
@@ -23,6 +23,26 @@ config FB_GEODE_GX
If unsure, say N.
+config FB_GEODE_GX_SET_FBSIZE
+ bool "Manually specify the Geode GX framebuffer size"
+ depends on FB_GEODE_GX
+ default n
+ ---help---
+ If you want to manually specify the size of your GX framebuffer,
+ say Y here, otherwise say N to dynamically probe it.
+
+ Say N unless you know what you are doing.
+
+config FB_GEODE_GX_FBSIZE
+ hex "Size of the GX framebuffer, in bytes"
+ depends on FB_GEODE_GX_SET_FBSIZE
+ default "0x1600000"
+ ---help---
+ Specify the size of the GX framebuffer. Normally, you will
+ want this to be MB aligned. Common values are 0x80000 (8MB)
+ and 0x1600000 (16MB). Don't change this unless you know what
+ you are doing
+
config FB_GEODE_GX1
tristate "AMD Geode GX1 framebuffer support (EXPERIMENTAL)"
depends on FB && FB_GEODE && EXPERIMENTAL
diff --git a/drivers/video/geode/display_gx.c b/drivers/video/geode/display_gx.c
index 0245169..0f16e4b 100644
--- a/drivers/video/geode/display_gx.c
+++ b/drivers/video/geode/display_gx.c
@@ -21,6 +21,12 @@ #include <asm/delay.h>
#include "geodefb.h"
#include "display_gx.h"
+#ifdef CONFIG_FB_GEODE_GX_SET_FBSIZE
+unsigned int gx_frame_buffer_size(void)
+{
+ return CONFIG_FB_GEODE_GX_FBSIZE;
+}
+#else
unsigned int gx_frame_buffer_size(void)
{
unsigned int val;
@@ -35,6 +41,7 @@ unsigned int gx_frame_buffer_size(void)
val = (unsigned int)(inw(0xAC1E)) & 0xFFl;
return (val << 19);
}
+#endif
int gx_line_delta(int xres, int bpp)
{
@@ -90,6 +97,7 @@ static void gx_set_mode(struct fb_info *
writel(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2,
par->dc_regs + DC_LINE_SIZE);
+
/* Enable graphics and video data and unmask address lines. */
dcfg |= DC_DCFG_GDEN | DC_DCFG_VDEN | DC_DCFG_A20M | DC_DCFG_A18M;
diff --git a/drivers/video/geode/display_gx.h b/drivers/video/geode/display_gx.h
index 41e79f4..e962c76 100644
--- a/drivers/video/geode/display_gx.h
+++ b/drivers/video/geode/display_gx.h
@@ -93,4 +93,5 @@ #define DC_V_SYNC_TIMING 0x58
#define DC_PAL_ADDRESS 0x70
#define DC_PAL_DATA 0x74
+#define DC_GLIU0_MEM_OFFSET 0x84
#endif /* !__DISPLAY_GX1_H__ */
diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/geode/gxfb_core.c
index a454dcb..742fd04 100644
--- a/drivers/video/geode/gxfb_core.c
+++ b/drivers/video/geode/gxfb_core.c
@@ -240,6 +240,12 @@ static int __init gxfb_map_video_memory(
if (!info->screen_base)
return -ENOMEM;
+ /* Set the 16MB aligned base address of the graphics memory region
+ * in the display controller */
+
+ writel(info->fix.smem_start & 0xFF000000,
+ par->dc_regs + DC_GLIU0_MEM_OFFSET);
+
dev_info(&dev->dev, "%d Kibyte of video memory at 0x%lx\n",
info->fix.smem_len / 1024, info->fix.smem_start);
diff --git a/drivers/video/geode/video_gx.c b/drivers/video/geode/video_gx.c
index 2b2a788..616ce33 100644
--- a/drivers/video/geode/video_gx.c
+++ b/drivers/video/geode/video_gx.c
@@ -178,7 +178,21 @@ static void gx_set_dclk_frequency(struct
static void gx_configure_display(struct fb_info *info)
{
struct geodefb_par *par = info->par;
- u32 dcfg, fp_pm;
+ u32 dcfg, fp_pm, misc;
+
+ /* Set up the MISC register */
+
+ misc = readl(par->vid_regs + GX_MISC);
+
+ /* Power up the DAC */
+ misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
+
+ /* Disable gamma correction */
+ misc |= GX_MISC_GAM_EN;
+
+ writel(misc, par->vid_regs + GX_MISC);
+
+ /* Write the display configuration */
dcfg = readl(par->vid_regs + GX_DCFG);
@@ -199,9 +213,17 @@ static void gx_configure_display(struct
if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
dcfg |= GX_DCFG_CRT_VSYNC_POL;
+ /* Enable the display logic */
+ /* Set up the DACS to blank normally */
+
+ dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN;
+
+ /* Enable the external DAC VREF? */
+
writel(dcfg, par->vid_regs + GX_DCFG);
/* Power on flat panel. */
+
fp_pm = readl(par->vid_regs + GX_FP_PM);
fp_pm |= GX_FP_PM_P;
writel(fp_pm, par->vid_regs + GX_FP_PM);
diff --git a/drivers/video/geode/video_gx.h b/drivers/video/geode/video_gx.h
index 2d9211f..238181a 100644
--- a/drivers/video/geode/video_gx.h
+++ b/drivers/video/geode/video_gx.h
@@ -28,6 +28,13 @@ # define GX_DCFG_VG_CK 0x00100000
# define GX_DCFG_GV_GAM 0x00200000
# define GX_DCFG_DAC_VREF 0x04000000
+/* Geode GX MISC video configuration */
+
+#define GX_MISC 0x50
+#define GX_MISC_GAM_EN 0x00000001
+#define GX_MISC_DAC_PWRDN 0x00000400
+#define GX_MISC_A_PWRDN 0x00000800
+
/* Geode GX flat panel display control registers */
#define GX_FP_PM 0x410
# define GX_FP_PM_P 0x01000000
More information about the Commits-kernel
mailing list