[PATCH] gxfb: Turn on the flatpanel power and data

Jordan Crouse jordan.crouse at amd.unroutablecom
Wed Dec 20 16:06:20 EST 2006


Commit:     58219896df521ddd749bee48a8465db69b6163f3
Parent:     53d53bd4ab3fd1498f728fa96635ab95d1ec8ba0
commit 58219896df521ddd749bee48a8465db69b6163f3
Author:     Jordan Crouse <jordan.crouse at amd.com>
AuthorDate: Fri Dec 8 02:40:56 2006 -0800
Commit:     Linus Torvalds <torvalds at woody.osdl.org>
CommitDate: Fri Dec 8 08:29:08 2006 -0800

    [PATCH] gxfb: Turn on the flatpanel power and data
    
    For Geode devices without a flatpanel aware BIOS, this enables the flatpanel
    power and data.
    
    Signed-off-by: Jordan Crouse <jordan.crouse at amd.com>
    Cc: "Antonino A. Daplas" <adaplas at pol.net>
    Acked-by: James Simmons <jsimmons at infradead.org>
    Signed-off-by: Andrew Morton <akpm at osdl.org>
    Signed-off-by: Linus Torvalds <torvalds at osdl.org>
---
 drivers/video/geode/video_gx.c |   13 +++++++++++--
 drivers/video/geode/video_gx.h |    2 ++
 2 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/video/geode/video_gx.c b/drivers/video/geode/video_gx.c
index bee0741..7f3f18d 100644
--- a/drivers/video/geode/video_gx.c
+++ b/drivers/video/geode/video_gx.c
@@ -220,7 +220,13 @@ gx_configure_tft(struct fb_info *info)
 	/*  Set the dither control */
 	writel(0x70, par->vid_regs + GX_FP_DFC);
 
-	/* Turn on the device */
+	/* Enable the FP data and power (in case the BIOS didn't) */
+
+	fp = readl(par->vid_regs + GX_DCFG);
+	fp |= GX_DCFG_FP_PWR_EN | GX_DCFG_FP_DATA_EN;
+	writel(fp, par->vid_regs + GX_DCFG);
+
+	/* Unblank the panel */
 
 	fp = readl(par->vid_regs + GX_FP_PM);
 	fp |= GX_FP_PM_P;
@@ -245,9 +251,12 @@ static void gx_configure_display(struct 
 	writel(misc, par->vid_regs + GX_MISC);
 
 	/* Write the display configuration */
-
 	dcfg = readl(par->vid_regs + GX_DCFG);
 
+	/* Disable hsync and vsync */
+	dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
+	writel(dcfg, par->vid_regs + GX_DCFG);
+
 	/* Clear bits from existing mode. */
 	dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK
 		  | GX_DCFG_CRT_HSYNC_POL   | GX_DCFG_CRT_VSYNC_POL
diff --git a/drivers/video/geode/video_gx.h b/drivers/video/geode/video_gx.h
index 119d0ab..ce28d8f 100644
--- a/drivers/video/geode/video_gx.h
+++ b/drivers/video/geode/video_gx.h
@@ -25,6 +25,8 @@ #  define GX_DCFG_CRT_EN		0x00000001
 #  define GX_DCFG_HSYNC_EN		0x00000002
 #  define GX_DCFG_VSYNC_EN		0x00000004
 #  define GX_DCFG_DAC_BL_EN		0x00000008
+#  define GX_DCFG_FP_PWR_EN		0x00000040
+#  define GX_DCFG_FP_DATA_EN		0x00000080
 #  define GX_DCFG_CRT_HSYNC_POL		0x00000100
 #  define GX_DCFG_CRT_VSYNC_POL		0x00000200
 #  define GX_DCFG_CRT_SYNC_SKW_MASK	0x0001C000


More information about the Commits-kernel mailing list