#12158 NORM 4-softw: xo-4 -- USB "cannot reset port" after boot
Zarro Boogs per Child
bugtracker at laptop.org
Tue Oct 9 15:04:11 EDT 2012
#12158: xo-4 -- USB "cannot reset port" after boot
--------------------+-------------------------------------------------------
Reporter: pgf | Owner:
Type: defect | Status: new
Priority: normal | Milestone: 4-software
Component: kernel | Version: Development source as of this date
Keywords: | Next_action: reproduce
Verified: 0 | Deployment_affected:
Blockedby: | Blocking:
--------------------+-------------------------------------------------------
i've seen the following "cannot reset port" issue several times on os5.
as can be seen below (at 323.48), removing and reinstalling the device
clears the error. only verified with one (usually reliable) USB stick.
{{{
CForth built 2012-10-01 21:56 from commit 48611f45...
Matrix mode on
releasing
USB devices:
/usb at d4208000/hub at 0,0
OLPC 4B1, 1063 MHz, 1 GiB memory, 4 GB internal storage, S/N SHC23800006
OpenFirmware Q7B01pa EC Firmware 0.2.02 2012-10-09 18:53:49 UTC
Type the Esc key to interrupt automatic startup
Boot device: /sd/sdhci at d4281000/disk:\boot\olpc.fth Arguments:
Boot device: /sd/sdhci at d4281000/disk:\boot\vmlinuz Arguments:
Loading ramdisk image from /sd/sdhci at d4281000/disk:\boot\initrd.img ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.4_xo4-20121003.1738.olpc.7c60128
(mockbuild at koji3.laptop.org) (gcc version 4.7.2 20120921 (Red Hat 4.7.2-2)
(GCC) ) #1 PREEMPT Wed Oct 3 17:50:20 EDT 2012
[ 0.000000] CPU: ARMv7 Processor [562f5842] revision 2 (ARMv7),
cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction
cache
[ 0.000000] Machine: Marvell MMP2 (Device Tree Support), model: 4B1
[ 0.000000] cma: CMA: reserved 64 MiB at 28000000
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 258064
[ 0.000000] Kernel command line: console=ttyS2,115200 console=tty0
selinux=0 fbcon=font:SUN12x22
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Memory: 1016MB = 1016MB total
[ 0.000000] Memory: 952096k/952096k available, 88288k reserved, 262144K
highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc05a2fd4 (5740 kB)
[ 0.000000] .init : 0xc05a3000 - 0xc05dcd6c ( 232 kB)
[ 0.000000] .data : 0xc05de000 - 0xc0619f88 ( 240 kB)
[ 0.000000] .bss : 0xc0619fac - 0xc06b4ccc ( 620 kB)
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] matched_mmp3_of_clk_apmu_setup
[ 0.000000] matched_mmp3_of_clk_apbc_setup
[ 0.000000] sched_clock: 32 bits at 6MHz, resolution 153ns, wraps every
660764ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.000892] Calibrating delay loop... 1059.22 BogoMIPS (lpj=5296128)
[ 0.040118] pid_max: default: 32768 minimum: 301
[ 0.040178] Mount-cache hash table entries: 512
[ 0.040524] CPU: Testing write buffer coherency: ok
[ 0.044177] ftrace: allocating 15564 entries in 46 pages
[ 0.072715] Setting up static identity map for 0x40a3c8 - 0x40a420
[ 0.074567] devtmpfs: initialized
[ 0.082582] NET: Registered protocol family 16
[ 0.092625] DMA: preallocated 256 KiB pool for atomic coherent
allocations
[ 0.095087] L310 cache controller enabled
[ 0.095257] l2x0: 8 ways, CACHE_ID 0x880000ed, AUX_CTRL 0x02860000,
Cache size: 524288 B
[ 0.095321] Wow! Can't register IRQ for DMA
[ 0.095321] OLPC board revision 4B1 (EC api 4)
[ 0.103247] bio: create slab <bio-0> at 0
[ 0.103895] SCSI subsystem initialized
[ 0.103895] usbcore: registered new interface driver usbfs
[ 0.104076] usbcore: registered new interface driver hub
[ 0.104178] usbcore: registered new device driver usb
[ 0.104901] i2c-gpio camera-i2c.0: using pins 166 (SDA) and 165 (SCL)
[ 0.105222] i2c-gpio dcon-i2c.1: using pins 167 (SDA) and 168 (SCL)
[ 0.105864] I2C: i2c-2: PXA I2C adapter
[ 0.106307] I2C: i2c-3: PXA I2C adapter
[ 0.106753] I2C: i2c-5: PXA I2C adapter
[ 0.107129] I2C: i2c-4: PXA I2C adapter
[ 0.107307] Linux video capture interface: v2.00
[ 0.107307] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.108071] cfg80211: Calling CRDA to update world regulatory domain
[ 0.108303] Switching to clocksource clocksource
[ 0.123525] NET: Registered protocol family 2
[ 0.123778] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.123778] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.124258] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.125870] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.125893] TCP: reno registered
[ 0.125913] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.125913] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.126122] NET: Registered protocol family 1
[ 0.126122] Trying to unpack rootfs image as initramfs...
[ 0.158513] Freeing initrd memory: 6664K
[ 0.169717] highmem bounce pool size: 64 pages
[ 0.170181] VFS: Disk quotas dquot_6.5.2
[ 0.170248] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.170768] msgmni has been set to 1488
[ 0.171469] io scheduler noop registered
[ 0.171491] io scheduler deadline registered
[ 0.171513] io scheduler cfq registered (default)
[ 0.188470] Console: switching to colour frame buffer device 100x40
[ 0.197698] pxa2xx-uart.1: ttyS2 at MMIO 0xd4017000 (irq = 28) is a
UART3
[ 0.633161] console [ttyS2] enabled
[ 0.641104] brd: module loaded
[ 0.664611] lis3lv02d: 8 bits 3DC sensor found
[ 0.758472] input: ST LIS3LV02DL Accelerometer as
/devices/platform/lis3lv02d/input/input0
[ 0.767238] OLPC XO-1.75 Embedded Controller driver probed
[ 0.777071] input: Power Button as /devices/d4037000.ec-
spi/input/input1
[ 0.808471] input: OLPC OLS notify as /devices/ols.4/input/input2
[ 0.819168] OLPC Outdoor Light Sensor driver probed
[ 0.828464] OLPC XO-1.75 lid and ebook switches
[ 0.828494] input: OLPC lid switch as /devices/virtual/input/input3
[ 0.848457] input: OLPC ebook switch as /devices/virtual/input/input4
[ 0.860066] usbcore: registered new interface driver ipheth
[ 0.870403] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.881643] pxau2o-ehci d4208000.usb: pxa9xx ehci
[ 0.891157] pxau2o-ehci d4208000.usb: new USB bus registered, assigned
bus number 1
[ 0.906582] pxau2o-ehci d4208000.usb: irq 44, io mem 0xd4208000
[ 0.928513] pxau2o-ehci d4208000.usb: USB 2.0 started, EHCI 1.00
[ 0.939279] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
[ 0.950605] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.962307] usb usb1: Product: pxa9xx ehci
[ 0.970845] usb usb1: Manufacturer: Linux
3.5.4_xo4-20121003.1738.olpc.7c60128 ehci_hcd
[ 0.983433] usb usb1: SerialNumber: d4208000.usb
[ 0.993103] hub 1-0:1.0: USB hub found
[ 1.001364] hub 1-0:1.0: 1 port detected
[ 1.009961] mmp3_usb_phy_init_internal: Init usb phy!!!
[ 1.020889] Initializing USB Mass Storage driver...
[ 1.030189] usbcore: registered new interface driver usb-storage
[ 1.040777] USB Mass Storage support registered.
[ 1.050029] usbcore: registered new interface driver libusual
[ 1.060271] usbcore: registered new interface driver mdc800
[ 1.070282] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800
Digital Camera
[ 1.082464] usbcore: registered new interface driver usbserial
[ 1.093021] usbcore: registered new interface driver usbserial_generic
[ 1.104194] USB Serial support registered for generic
[ 1.113942] usbserial: USB Serial Driver core
[ 1.123174] OLPC SP keyboard/touchpad driver probed
[ 1.133429] sa1100-rtc d4010000.wakeup-rtc: rtc core: registered
d4010000.wakeup-rtc as rtc0
[ 1.147173] rtc_idt1338 3-0068: rtc core: registered rtc_idt1338 as
rtc1
[ 1.256759] input: AT Translated Set 2 keyboard as /devices/d4290000
.ap-sp/serio0/input/input5
[ 1.328488] usb 1-1: new high-speed USB device number 2 using pxau2o-
ehci
[ 1.444780] mmp3_thermal: setting thermal watchdog to 100.5C
[ 1.467650] sdhci: Secure Digital Host Controller Interface driver
[ 1.478646] sdhci: Copyright(c) Pierre Ossman
[ 1.487726] mmc0: FIXME: setting broken card detection quirk, remove
this hack once the 'broken-cd' DT property is in-place.
[ 1.510371] usb 1-1: New USB device found, idVendor=05e3,
idProduct=0608
[ 1.522119] usb 1-1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 1.535140] usb 1-1: Product: USB2.0 Hub
[ 1.544639] hub 1-1:1.0: USB hub found
[ 1.553265] mmc0: SDHCI controller on d4280800.sdhci [d4280800.sdhci]
using ADMA
[ 1.565685] mmc1: FIXME: setting broken card detection quirk, remove
this hack once the 'broken-cd' DT property is in-place.
[ 1.587164] hub 1-1:1.0: 4 ports detected
[ 1.624469] mmc0: new SDIO card at address 0001
[ 1.634089] mmc1: SDHCI controller on d4281000.sdhci [d4281000.sdhci]
using ADMA
[ 1.646822] mmc2: FIXME: setting broken card detection quirk, remove
this hack once the 'broken-cd' DT property is in-place.
[ 1.708479] mmc2: SDHCI controller on d4280000.sdhci [d4280000.sdhci]
using ADMA
[ 1.721278] mmc3: FIXME: setting broken card detection quirk, remove
this hack once the 'broken-cd' DT property is in-place.
[ 1.745533] mmc1: new high speed DDR MMC card at address 0001
[ 1.757113] mmcblk0: mmc1:0001 SEM04G 3.68 GiB
[ 1.768158] mmcblk0boot0: mmc1:0001 SEM04G partition 1 1.00 MiB
[ 1.779737] mmc3: SDHCI controller on d4217000.sdhci [d4217000.sdhci]
using ADMA
[ 1.792826] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.804374] mmcblk0boot1: mmc1:0001 SEM04G partition 2 1.00 MiB
[ 1.816871] usbcore: registered new interface driver usbhid
[ 1.828195] mmcblk0: p1 p2
[ 1.836658] usbhid: USB HID core driver
[ 1.846835] olpc-dcon: Discovered DCON version 2
[ 1.858621] mmcblk0boot1: unknown partition table
[ 1.872640] i2c-core: driver [olpc_dcon] using legacy suspend method
[ 1.885210] i2c-core: driver [olpc_dcon] using legacy resume method
[ 1.897309] mmcblk0boot0: unknown partition table
[ 1.908135] usbcore: registered new interface driver snd-usb-audio
[ 2.209257] asoc: rt5631-hifi <-> mmp-sspa-dai.0 mapping ok
[ 2.220847] input: OLPC XO-1.75 Headphone Jack as /devices/platform
/olpc-xo-1-75-audio/sound/card0/input6
[ 2.241452] input: OLPC XO-1.75 Mic Jack as /devices/platform/olpc-
xo-1-75-audio/sound/card0/input7
[ 2.262330] TCP: bic registered
[ 2.270837] Initializing XFRM netlink socket
[ 2.280568] NET: Registered protocol family 10
[ 2.290418] NET: Registered protocol family 17
[ 2.300789] lib80211: common routines for IEEE802.11 drivers
[ 2.312692] Key type dns_resolver registered
[ 2.322101] VFP support v0.3: implementor 56 architecture 2 part 20
variant 9 rev 6
[ 2.335985] ThumbEE CPU extension supported.
[ 2.345371] Registering SWP/SWPB emulation handler
[ 2.355328] PJ4 iWMMXt coprocessor enabled.
[ 2.365573] rtc_idt1338 3-0068: setting system clock to 2012-10-09
18:53:57 UTC (1349808837)
[ 2.384479] ALSA device list:
[ 2.392814] #0: OLPC XO-1.75
[ 2.401114] Freeing init memory: 228K
[ 2.433487] tmpfs: No value for mount option 'strictatime'
[ 2.454614] tmpfs: No value for mount option 'strictatime'
[ 2.475686] tmpfs: No value for mount option 'strictatime'
[ 2.519490] dracut: dracut-18 (Spherical Cow)
dracut-023-39.git20120910.fc18.dsd1
[ 2.560215] systemd-udevd[73]: starting version 188
[ 3.725408] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data
mode. Opts: (null)
[ 3.751395] dracut Warning: Option 'rd_NO_FSTAB' is deprecated, use
'rd.fstab=0' instead.
[ 3.773091] dracut: Remounting /dev/disk/mmc/mmc1p2 with -o
[ 3.786520] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 3.810992] dracut: Mounted root filesystem /dev/disk/mmc/mmc1p2
[ 3.830862] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 3.850768] EXT4-fs (mmcblk0p1): mounted filesystem without journal.
Opts: (null)
[ 3.877666] Dsize 7733248 Psize 7593984 Pstart 139264 Pend 7733248
[ 4.336861] dcon_freeze_store: 0
[ 4.340553] dcon_source_switch to CPU
[ 4.372107] olpc-dcon: The CPU has control
[ 4.500525] dracut: Switching root
[ 4.634626] systemd[1]: systemd 188 running in system mode. (+PAM
+LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP; fedora)
[ 4.651182] systemd[1]: Set hostname to <xo-93-14-bd.localdomain>.
[ 4.966122] systemd-journald[226]: Fixed max_use=50.0M max_size=6.2M
min_size=64.0K keep_free=25.0M
[ 5.002895] systemd-udevd[232]: starting version 188
[ 5.089500] systemd-journald[226]: Reserving 11384 entries in hash
table.
[ 5.173158] systemd-journald[226]: Vacuuming...
[ 5.342085] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 5.942282] ov7670 0-0021: chip found @ 0x42 (i2c-gpio-1)
[ 6.073527] systemd-journald[226]: Received SIGUSR1
[ 6.081948] zforce: running in single touch mode
[ 6.086823] input: zForce touchscreen as
/devices/d4033000.i2c/i2c-5/5-0050/input/input8
[ 6.155951] got GPIOs power=150 reset=102
[ 6.216193] calling clk_mmp_enable_ccic
[ 6.306252] zforce: found zForce firmware 0.0.0.4
[ 6.389576] usbcore: registered new interface driver sisusb
[ 6.427196] usbcore: registered new interface driver udlfb
[ 6.558499] usbcore: deregistering interface driver udlfb
[ 6.689951] runin-check: noop
[ 6.710190] calling clk_mmp_disable_ccic
[ 6.744191] libertas_sdio: Libertas SDIO driver
[ 6.845008] libertas_sdio: Copyright Pierre Ossman
[ 7.143085] input: PS/2 Synaptics TouchPad as /devices/d4290000.ap-
sp/serio1/input/input9
[ 7.448333] dcon_freeze_store: 1
[ 7.490555] dcon_source_switch to DCON
[ 7.520656] olpc-dcon: The DCON has control
[ 7.834652] mousedev: PS/2 mouse device common for all mice
[ 7.950491] calling clk_mmp_enable_ccic
[ 8.309160] input: olpc-kbdshim virtual keyboard as
/devices/virtual/input/input10
[ 8.480652] input: olpc-kbdshim virtual mouse as
/devices/virtual/input/input11
[ 8.734879] input: olpc-kbdshim virtual touchscreen as
/devices/virtual/input/input12
[ 9.261743] libertas_sdio mmc0:0001:1: (unregistered net_device):
20:7c:8f:93:14:bd, fw 9.70.20p0, cap 0x000003a3
[ 9.326120] libertas_sdio mmc0:0001:1: wlan0: Marvell WLAN 802.11
adapter
[ 9.446560] systemd-udevd[255]: renamed network interface wlan0 to eth0
[ 9.541941] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.728490] calling clk_mmp_disable_ccic
[ 10.308996] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 24.730702] dcon_freeze_store: 0
[ 24.734343] dcon_source_switch to CPU
[ 24.768035] olpc-dcon: The CPU has control
bash-4.2#
bash-4.2#
bash-4.2#
bash-4.2# [ 71.088944] usb 1-1.3: new high-speed USB device number 3
using pxau2o-ehci
[ 71.522992] usb 1-1.3: New USB device found, idVendor=05dc,
idProduct=a740
[ 71.530162] usb 1-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 71.537446] usb 1-1.3: Product: USB Flash Drive
[ 71.543193] usb 1-1.3: Manufacturer: UFD
[ 71.549257] usb 1-1.3: SerialNumber: AA04013000009789
[ 71.562478] scsi0 : usb-storage 1-1.3:1.0
bash-4.2#
bash-4.2# [ 72.560408] scsi 0:0:0:0: Direct-Access UFD USB
Flash Drive 1100 PQ: 0 ANSI: 0 CCS
[ 72.574780] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 72.580264] sd 0:0:0:0: [sda] 3915776 512-byte logical blocks: (2.00
GB/1.86 GiB)
[ 72.596983] sd 0:0:0:0: [sda] Write Protect is off
[ 72.606154] sd 0:0:0:0: [sda] No Caching mode page present
[ 72.611857] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 72.622747] sd 0:0:0:0: [sda] No Caching mode page present
[ 72.622766] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 72.635566] sda: sda1
[ 72.644142] sd 0:0:0:0: [sda] No Caching mode page present
[ 72.649930] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 72.656013] sd 0:0:0:0: [sda] Attached SCSI removable disk
bash-4.2#
bash-4.2#
bash-4.2#
bash-4.2# rpm -U
/run/media/olpc/Kodak/kernel-3.5.4_xo4-20121009.1039.olpc.16b5249.armv7hl.rpm
[ 77.811630] hub 1-1:1.0: cannot reset port 3 (err = -71)
[ 77.849188] hub 1-1:1.0: cannot reset port 3 (err = -71)
[ 77.886608] hub 1-1:1.0: cannot reset port 3 (err = -71)
[ 77.924608] hub 1-1:1.0: cannot reset port 3 (err = -71)
[ 77.962640] hub 1-1:1.0: cannot reset port 3 (err = -71)
[ 77.967945] hub 1-1:1.0: Cannot enable port 3. Maybe the USB cable is
bad?
[ 78.006608] hub 1-1:1.0: cannot disable port 3 (err = -71)
[ 78.044608] hub 1-1:1.0: cannot reset port 3 (err = -71)
[ 78.082608] hub 1-1:1.0: cannot reset port 3 (err = -71)
[ 78.119636] hub 1-1:1.0: cannot reset port 3 (err = -71)
[ 78.156627] hub 1-1:1.0: cannot reset port 3 (err = -71)
[ 78.194627] hub 1-1:1.0: cannot reset port 3 (err = -71)
[ 78.200421] hub 1-1:1.0: Cannot enable port 3. Maybe the USB cable is
bad?
[ 78.239173] hub 1-1:1.0: cannot disable port 3 (err = -71)
[ 78.276626] hub 1-1:1.0: cannot reset port 3 (err = -71)
[ 78.314627] hub 1-1:1.0: cannot reset port 3 (err = -71)
[ 78.351628] hub 1-1:1.0: cannot reset port 3 (err = -71)
[ 78.389167] hub 1-1:1.0: cannot reset port 3 (err = -71)
[ 78.425626] hub 1-1:1.0: cannot reset port 3 (err = -71)
[ 78.432046] hub 1-1:1.0: Cannot enable port 3. Maybe the USB cable is
bad?
[ 78.470635] hub 1-1:1.0: cannot disable port 3 (err = -71)
[ 78.507640] hub 1-1:1.0: cannot reset port 3 (err = -71)
[ 78.545626] hub 1-1:1.0: cannot reset port 3 (err = -71)
[ 78.583639] hub 1-1:1.0: cannot reset port 3 (err = -71)
[ 78.620629] hub 1-1:1.0: cannot reset port 3 (err = -71)
[ 78.657626] hub 1-1:1.0: cannot reset port 3 (err = -71)
[ 78.663599] hub 1-1:1.0: Cannot enable port 3. Maybe the USB cable is
bad?
[ 78.702627] hub 1-1:1.0: cannot disable port 3 (err = -71)
[ 78.739615] hub 1-1:1.0: cannot disable port 3 (err = -71)
[ 78.776610] hub 1-1:1.0: hub_port_status failed (err = -71)
[ 78.838495] sd 0:0:0:0: [sda] Unhandled error code
[ 78.838530] sd 0:0:0:0: [sda]
[ 78.846397] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 78.851937] sd 0:0:0:0: [sda] CDB:
[ 78.851947] Read(10): 28 00 00 18 6f 40 00 00 f0 00
[ 78.860280] end_request: I/O error, dev sda, sector 1601344
[ 78.958488] sd 0:0:0:0: [sda] Unhandled error code
[ 78.958509] sd 0:0:0:0: [sda]
[ 78.963268] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 78.971914] sd 0:0:0:0: [sda] CDB:
[ 78.971924] Read(10): 28 00 00 18 70 30 00 00 10 00
[ 78.978504] end_request: I/O error, dev sda, sector 1601584
[ 79.078508] sd 0:0:0:0: [sda] Unhandled error code
[ 79.078508] sd 0:0:0:0: [sda]
[ 79.083262] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 79.091917] sd 0:0:0:0: [sda] CDB:
[ 79.091917] Read(10): 28 00 00 18 70 40 00 00 f0 00
[ 79.098502] end_request: I/O error, dev sda, sector 1601600
[ 79.198485] sd 0:0:0:0: [sda] Unhandled error code
[ 79.203257] sd 0:0:0:0: [sda]
[ 79.203257] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 79.211912] sd 0:0:0:0: [sda] CDB:
[ 79.211912] Read(10): 28 00 00 18 71 30 00 00 10 00
[ 79.218496] end_request: I/O error, dev sda, sector 1601840
[ 79.318541] sd 0:0:0:0: [sda] Unhandled error code
[ 79.323357] sd 0:0:0:0: [sda]
[ 79.326472] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 79.332017] sd 0:0:0:0: [sda] CDB:
[ 79.332027] Read(10): 28 00 00 18 6f 40 00 00 08 00
[ 79.338619] end_request: I/O error, dev sda, sector 1601344
[ 79.428483] sd 0:0:0:0: [sda] Unhandled error code
[ 79.428505] sd 0:0:0:0: [sda]
[ 79.436369] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 79.441906] sd 0:0:0:0: [sda] CDB:
[ 79.441915] Read(10): 28 00 00 18 6f 40 00 00 08 00
[ 79.450234] end_request: I/O error, dev sda, sector 1601344
[ 79.548510] sd 0:0:0:0: [sda] Unhandled error code
[ 79.548510] sd 0:0:0:0: [sda]
[ 79.553267] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 79.561922] sd 0:0:0:0: [sda] CDB:
[ 79.561931] Read(10): 28 00 00 18 6f 40 00 00 08 00
[ 79.568513] end_request: I/O error, dev sda, sector 1601344
error: unpacking of archive failed on file
/boot/actrd-3.5.4_xo4-20121009.1039.olpc.16b5249.img;5074730f: cpio: read
failed - Input/output error
error: kernel-3.5.4_xo4-20121009.1039.olpc.16b5249.armv7hl: install failed
error: kernel-3.5.4_xo4-20121003.1738.olpc.7c60128.armv7hl: erase skipped
bash-4.2# [ 80.519546] sda: detected capacity change from 2004877312 to
0
[ 82.468524] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 82.608573] netlink: 12 bytes leftover after parsing attributes.
[ 82.608573] netlink: 12 bytes leftover after parsing attributes.
[ 82.643279] netlink: 12 bytes leftover after parsing attributes.
[ 323.486943] usb 1-1.3: USB disconnect, device number 3
[ 323.618482] usb 1-1: reset high-speed USB device number 2 using pxau2o-
ehci
[ 324.068722] usb 1-1.3: new high-speed USB device number 4 using pxau2o-
ehci
[ 324.532867] usb 1-1.3: New USB device found, idVendor=05dc,
idProduct=a740
[ 324.539967] usb 1-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 324.539982] usb 1-1.3: Product: USB Flash Drive
[ 324.552838] usb 1-1.3: Manufacturer: UFD
[ 324.552851] usb 1-1.3: SerialNumber: AA04013000009789
[ 324.571713] scsi1 : usb-storage 1-1.3:1.0
[ 325.570284] scsi 1:0:0:0: Direct-Access UFD USB Flash Drive
1100 PQ: 0 ANSI: 0 CCS
[ 325.584636] sd 1:0:0:0: [sda] 3915776 512-byte logical blocks: (2.00
GB/1.86 GiB)
[ 325.593824] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 325.605653] sd 1:0:0:0: [sda] Write Protect is off
[ 325.613258] sd 1:0:0:0: [sda] No Caching mode page present
[ 325.618989] sd 1:0:0:0: [sda] Assuming drive cache: write through
[ 325.629756] sd 1:0:0:0: [sda] No Caching mode page present
[ 325.629776] sd 1:0:0:0: [sda] Assuming drive cache: write through
[ 325.642561] sda: sda1
[ 325.650644] sd 1:0:0:0: [sda] No Caching mode page present
[ 325.656138] sd 1:0:0:0: [sda] Assuming drive cache: write through
[ 325.663111] sd 1:0:0:0: [sda] Attached SCSI removable disk
bash-4.2# rpm -U
/run/media/olpc/Kodak/kernel-3.5.4_xo4-20121009.1039.olpc.16b5249.armv7hl.rpm
WARNING: could not open
/lib/modules/3.5.4_xo4-20121009.1039.olpc.16b5249/modules.order: No such
file or directory
WARNING: could not open
/lib/modules/3.5.4_xo4-20121009.1039.olpc.16b5249/modules.builtin: No such
file or directory
}}}
--
Ticket URL: <http://dev.laptop.org/ticket/12158>
One Laptop Per Child <http://laptop.org/>
OLPC bug tracking system
More information about the Bugs
mailing list