#11847 HIGH -: Firmware q2f10: Test Hardware: If fails power off

[Zarro Boogs per Child]

#11847: Firmware q2f10: Test Hardware: If fails power off
-------------------------------------------+--------------------------------
           Reporter:  earias               |       Owner:  quozl at laptop.org    
               Type:  defect               |      Status:  reopened            
           Priority:  high                 |   Milestone:                      
          Component:  ofw - open firmware  |     Version:  Development firmware
         Resolution:                       |    Keywords:                      
        Next_action:  no action            |    Verified:  0                   
Deployment_affected:                       |   Blockedby:                      
           Blocking:                       |  
-------------------------------------------+--------------------------------
Changes (by reuben):

 * cc: wmb (added)


Comment:

 This was not explained to me in the same manner as reported here:

 Here is the workflow:

 -Using Q2F11
 -Launch Self Test. Allow testall to start
 -Interrupt one of the tests. (It does not require a failure)
 -You will be taken back to the graphical menu
 -Press any key and the system will power off.

 The desired behavior is that you should either be able to continue to
 another test or navigate to stop sign and power off.

-- 
Ticket URL: <http://dev.laptop.org/ticket/11847#comment:4>
One Laptop Per Child <http://laptop.org/>
OLPC bug tracking system