#12408 NORM 4-firmw: [CL4] In OFW mode, it will show error information after input some commands.

[Zarro Boogs per Child]

#12408: [CL4] In OFW mode, it will show error information after input some
commands.
-------------------------------------------+--------------------------------
           Reporter:  tomyin               |       Owner:  Quozl        
               Type:  defect               |      Status:  closed       
           Priority:  normal               |   Milestone:  4-firmware   
          Component:  ofw - open firmware  |     Version:  not specified
         Resolution:  wontfix              |    Keywords:               
        Next_action:  no action            |    Verified:  0            
Deployment_affected:                       |   Blockedby:               
           Blocking:                       |  
-------------------------------------------+--------------------------------
Changes (by Quozl):

  * status:  assigned => closed
  * next_action:  never set => no action
  * resolution:  => wontfix


Comment:

 Thanks.

 You must ''unselect'' the touchscreen driver before running any of these
 tests:
  * ''tsts''
  * ''test-ir-pcb-assy''
  * ''test-lightguide''

 And then ''select'' again before ''scribble''.  Because these three tests
 include an implicit opening of the device.

 There were a few problems with error reporting and these have been fixed
 in svn 3504, test build here:
 http://dev.laptop.org/~quozl/q7b09jc.rom

 But the underlying problem you have is mistake in your commands.

-- 
Ticket URL: <http://dev.laptop.org/ticket/12408#comment:4>
One Laptop Per Child <http://laptop.org/>
OLPC bug tracking system