#11528 NORM Not Tri: XO-1.75 os18 runin write-only filesystem

[Zarro Boogs per Child]

#11528: XO-1.75 os18 runin write-only filesystem
--------------------------+-------------------------------------------------
 Reporter:  Quozl         |                 Owner:               
     Type:  defect        |                Status:  new          
 Priority:  normal        |             Milestone:  Not Triaged  
Component:  not assigned  |               Version:  not specified
 Keywords:                |           Next_action:  never set    
 Verified:  0             |   Deployment_affected:               
Blockedby:                |              Blocking:               
--------------------------+-------------------------------------------------
 {{{
 [ 8200.473573] olpc-ec-1.75: got event 0a
 [ 8209.310756] olpc-ec-1.75: command 0x16 returned fewer bytes (0) than
 expected (1)
 [ 8209.310804] power_supply olpc-battery: driver failed to report
 `capacity' property
 [ 8209.329429] pxa9xx_u2o_host_enable: PORTSC 0xc000800 USBMODE 0x3 USBSTS
 0x1080 USBCMD 0x80b00
 [ 8209.330214] usb usb1: usb resume
 [ 8209.330231] pxau2o-ehci pxau2o-ehci.0: resume root hub after power loss
 [ 8209.379489] hub 1-0:1.0: hub_resume
 [ 8209.379489] pxau2o-ehci pxau2o-ehci.0: GetStatus port:1 status 00180b 0
 ACK POWER sig=j PEC CSC CONNECT
 [ 8209.379529] hub 1-0:1.0: port 1: status 0101 change 0003
 [ 8209.489642] usb 1-1: finish reset-resume
 [ 8209.559701] [galcore]: gpu_resume, 1369
 [ 8209.560145] >>>>>>[_gpu_on]@1153
 [ 8209.560155] Bus Clock: USB PLL 480MHz
 [ 8209.560167] GC Controller Clock: USB PLL 480MHz
 [ 8209.569731] <<<<<<[_gpu_on]@1173
 [ 8209.590646] mmcblk0: error -110 sending status command
 [ 8209.590671] mmcblk0: error -110 sending read/write command, response
 0x0, card status 0x0
 [ 8209.592575] mmcblk0: error -110 requesting status
 [ 8209.592575] end_request: I/O error, dev mmcblk0, sector 2750984
 [ 8209.592593] Buffer I/O error on device mmcblk0p2, logical block 326465
 [ 8209.592612] lost page write due to I/O error on mmcblk0p2
 [ 8209.592755] JBD2: Detected IO errors while flushing file data on
 mmcblk0p2-8
 [ 8209.593381] mmcblk0: error -110 sending status command
 [ 8209.593389] mmcblk0: error -110 sending SET_BLOCK_COUNT command,
 response 0x0, card status 0x0
 [ 8209.595299] mmcblk0: error -110 requesting status
 [ 8209.595306] end_request: I/O error, dev mmcblk0, sector 3630720
 [ 8209.595336] end_request: I/O error, dev mmcblk0, sector 3630728
 [ 8209.595371] Aborting journal on device mmcblk0p2-8.
 [ 8209.596107] mmcblk0: error -110 sending status command
 [ 8209.596117] mmcblk0: error -110 sending SET_BLOCK_COUNT command,
 response 0x0, card status 0x0
 [ 8209.598023] mmcblk0: error -110 requesting status
 [ 8209.598044] end_request: I/O error, dev mmcblk0, sector 3547136
 [ 8209.598044] Buffer I/O error on device mmcblk0p2, logical block 425984
 [ 8209.598060] lost page write due to I/O error on mmcblk0p2
 [ 8209.598105] JBD2: I/O error detected when updating journal superblock
 for mmcblk0p2-8.
 [ 8209.609833] usb 1-1: reset high speed USB device number 2 using pxau2o-
 ehci
 [ 8209.761069] hub 1-1:1.0: hub_reset_resume
 [ 8209.761085] hub 1-1:1.0: enabling power on all ports
 [ 8209.871203] usb 1-1: link qh256-0001/ee61d260 start 16 [1/0 us]
 [ 8209.890800] dcon_source_switch to CPU
 [ 8209.891426] PM: resume of devices complete after 10569.235 msecs
 [ 8210.116977] olpc-dcon: The CPU has control
 [ 8210.121066] Restarting tasks ...
 [ 8210.124268] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
 [ 8210.124494] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0002
 [ 8210.124494] hub 1-0:1.0: port 1, status 0503, change 0000, 480 Mb/s
 [ 8210.165771] EXT4-fs error (device mmcblk0p2):
 ext4_journal_start_sb:296: done.
 [ 8210.202494] EXT4-fs error (device mmcblk0p2):
 ext4_journal_start_sb:296: Detected aborted journal
 [ 8210.258433] EXT4-fs (mmcblk0p2): Remounting filesystem read-only
 [ 8210.291273] Detected aborted journal
 [ 8210.330986] EXT4-fs (mmcblk0p2): Remounting filesystem read-only
 [ 8210.477911] mmc1: new SDIO card at address 0001
 [ 8211.445446] libertas_sdio mmc1:0001:1: (unregistered net_device):
 20:7c:8f:72:97:bf, fw 9.70.3p36, cap 0x000003a3
 [ 8211.482197] libertas_sdio mmc1:0001:1: wlan0: Marvell WLAN 802.11
 adapter
 [ 8211.520946] udev[4775]: renamed network interface wlan0 to eth0
 [ 8211.601846] ADDRCONF(NETDEV_UP): eth0: link is not ready
 [ 8212.390179] hub 1-1:1.0: hub_suspend
 [ 8212.390216] usb 1-1: unlink qh256-0001/ee61d260 start 16 [1/0 us]
 [ 8212.390677] usb 1-1: usb auto-suspend
 [ 8212.470122] olpc-ec-1.75: got event 09
 [ 8214.410194] hub 1-0:1.0: hub_suspend
 [ 8214.410240] usb usb1: bus auto-suspend
 [ 8214.410295] pxau2o-ehci pxau2o-ehci.0: suspend root hub
 [ 8267.067394] olpc-ec-1.75: got event 04
 [ 8337.750162] olpc-ec-1.75: got event 04
 [
 }}}

-- 
Ticket URL: <http://dev.laptop.org/ticket/11528>
One Laptop Per Child <http://laptop.org/>
OLPC bug tracking system