#11089 HIGH 1.75-fi: XO-1.75 B1 brick due to efface-md failure to flash-open (after RTC power fail or sufficient elapsed time) (was: XO-1.75 B1 brick after RTC power fail due to efface-md failure to flash-open)
Zarro Boogs per Child
bugtracker at laptop.org
Tue Aug 2 19:02:39 EDT 2011
#11089: XO-1.75 B1 brick due to efface-md failure to flash-open (after RTC power
fail or sufficient elapsed time)
-------------------------------------------+--------------------------------
Reporter: Quozl | Owner: wmb at firmworks.com
Type: defect | Status: new
Priority: high | Milestone: 1.75-firmware
Component: ofw - open firmware | Version: 1.75-B1
Resolution: | Keywords:
Next_action: test in build | Verified: 0
Deployment_affected: | Blockedby:
Blocking: |
-------------------------------------------+--------------------------------
Description changed by Quozl:
Old description:
> An XO-1.75 B1 with Q4B05 with an "md" tag will brick if the RTC loses
> power.
>
> Diagnosis: OpenFirmware serial port shows an ok prompt after an error
> ''Unsupported SPI FLASH ID''. Using ''flash-open'' manually at this
> point shows no error.
>
> Workaround: flash Q4B02d, boot, then flash Q4B05.
>
> Prevention: manually change the "md" tag to an "MD" tag.
New description:
An XO-1.75 B1 with Q4B05 with an "md" tag will brick if the RTC loses
power, or if enough time has elapsed since the "md" tag was created in
factory.
Diagnosis: OpenFirmware serial port shows an ok prompt after an error
''Unsupported SPI FLASH ID''. Using ''flash-open'' manually at this point
shows no error.
Workaround: flash q4b05jt (svn 2402) or later.
Prevention: manually change the "md" tag to an "MD" tag, before the time
has elapsed, or before the RTC loses power.
--
--
Ticket URL: <http://dev.laptop.org/ticket/11089#comment:5>
One Laptop Per Child <http://laptop.org/>
OLPC bug tracking system
More information about the Bugs
mailing list