#9436 NORM Not Tri: Flash failed to program correctly

[Zarro Boogs per Child]

#9436: Flash failed to program correctly
--------------------------+-------------------------------------------------
 Reporter:  wad           |                 Owner:             
     Type:  defect        |                Status:  new        
 Priority:  normal        |             Milestone:  Not Triaged
Component:  not assigned  |               Version:  1.5-A2     
 Keywords:                |           Next_action:  never set  
 Verified:  0             |   Deployment_affected:             
Blockedby:                |              Blocking:             
--------------------------+-------------------------------------------------
 On an XO-1.5 A2 prototype, I tried to reprogram the SPI Flash with
 q3a08.rom using flash.  The programming occured with no errors, but on
 reboot the machine was bricked.  The EC booted but OFW didn't boot.

 I suspect that the USB key had an invalid q3a08.rom image (it was removed
 early from the download laptop), but there were no verify errors.

 The SPI ROM was desoldered, and a new SPI Flash ROM with q3a08.rom
 preinstalled was soldered into place.  The laptop runs fine (Pre-
 production, so no manufacturing data!)

 The old ROM is sitting near the device programmer (blue dot), if further
 information is desired...

-- 
Ticket URL: <http://dev.laptop.org/ticket/9436>
One Laptop Per Child <http://laptop.org/>
OLPC bug tracking system