#6742 NORM Never A: SD & USB storage interferes with Activities' loading, Journal entries
Zarro Boogs per Child
bugtracker at laptop.org
Sun Mar 23 15:49:24 EDT 2008
#6742: SD & USB storage interferes with Activities' loading, Journal entries
---------------------------+------------------------------------------------
Reporter: NeoAmsterdam | Owner: wad
Type: defect | Status: new
Priority: normal | Milestone: Never Assigned
Component: hardware | Version:
Resolution: | Keywords: SD, USB, storage media, Sugar, Journal, performance degredation, unresponsive, lock-up
Verified: 0 | Blocking:
Blockedby: |
---------------------------+------------------------------------------------
Comment(by NeoAmsterdam):
I started '''olpc-update -v update.1-702''' about 40 mintues ago and the
progress has been stuck at '''Rsyncing:
lib/modules/2.6.22-20080312.2.olpc.f3687aa7e09fd65/kernel/crypto''' ever
since.
Getting '''dmesg''''s output was a pain (good thing I had '''yum'''med
'''elinks''' to the XO) but the output is as follows (slightly modified
for appearance):
{{{
[ 0.000000] Linux version 2.6.22-20071231.2.olpc.83e0631da83a269
(dilinger at fc6.laptop.org) (gcc version 4.1.2 20070925 (Red Hat
4.1.2-27))
#1 PREEMPT Mon Dec 31 10:37:17 EST 2007
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e801: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e801: 0000000000100000 - 000000000edfd000 (usable)
[ 0.000000] 237MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 60925) 0 entries of 256
used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 60925
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 60925
[ 0.000000] On node 0 totalpages: 60925
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 443 pages used for memmap
[ 0.000000] Normal zone: 56386 pages, LIFO batch:15
[ 0.000000] DMI not present or invalid.
[ 0.000000] Allocating PCI resources starting at 10000000
(gap: 0edfd000:f1203000)
[ 0.000000] Built 1 zonelists. Total pages: 60450
[ 0.000000] Kernel command line:
[ 0.000000] Initializing CPU#0
[ 0.000000] CPU 0 irqstacks, hard=c0713000 soft=c0712000
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 430.959 MHz processor.
[ 16.958415] Console: colour EGA 80x25
[ 16.959440] Dentry cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 16.960095] Inode-cache hash table entries: 16384 (order: 4, 65536
bytes)
[ 16.998165] Memory: 235016k/243700k available
(2141k kernel code, 8068k reserved, 811k data, 164k init, 0k
highmem)
[ 16.998299] virtual kernel memory layout:
[ 16.998309] fixmap : 0xffffd000 - 0xfffff000 ( 8 kB)
[ 16.998321] vmalloc : 0xcf800000 - 0xffffb000 ( 775 MB)
[ 16.998334] lowmem : 0xc0000000 - 0xcedfd000 ( 237 MB)
[ 16.998346] .init : 0xc06e4000 - 0xc070d000 ( 164 kB)
[ 16.998359] .data : 0xc0617596 - 0xc06e21b4 ( 811 kB)
[ 16.998371] .text : 0xc0400000 - 0xc0617596 (2141 kB)
[ 16.998773] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 17.149695] Calibrating delay using timer specific routine.. 862.98
BogoMIPS (lpj=4314906)
[ 17.150063] Security Framework v1.0.0 initialized
[ 17.150148] Capability LSM initialized
[ 17.150314] Mount-cache hash table entries: 512
[ 17.150864] CPU: After generic identify, caps: 0088a93d c0c0a13d
00000000 00000000 00000000 00000000 00000000
[ 17.150924] CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32
bytes/line)
[ 17.151003] CPU: L2 Cache: 128K (32 bytes/line)
[ 17.151072] CPU: After all inits, caps: 0088a93d c0c0a13d
00000000 00000000 00000000 00000000 00000000
[ 17.151129] Compat vDSO mapped to ffffe000.
[ 17.151211] CPU: AMD Geode(TM) Integrated Processor by AMD
PCS stepping 02
[ 17.151421] Checking 'hlt' instruction... OK.
[ 17.190226] PM: Adding info for No Bus:platform
[ 17.190682] NET: Registered protocol family 16
[ 17.190791] geode-mfgpt: Registered timer 0
[ 17.190878] mfgpt-timer: registering the MFGT timer as a clock event.
[ 17.191231] geode-mfgpt: 8 timers available.
[ 17.191472] OLPC board with OpenFirmware: CL1 Q2D07 Q2D
[ 17.191624] olpc-ec: running cmd 0x8
[ 17.200671] olpc-ec: received 0x50
[ 17.200696] OLPC board revision: C2 (EC=50)
[ 17.201072] PM: Adding info for No Bus:vtcon0
[ 17.201346] PM: Adding info for platform:rtc_cmos
[ 17.201533] PM: Adding info for platform:powerbutton
[ 17.201717] PM: Adding info for platform:lid
[ 17.202408] PCI: Using configuration type OLPC
[ 17.202480] Setting up standard PCI resources
[ 17.208972] SCSI subsystem initialized
[ 17.209371] usbcore: registered new interface driver usbfs
[ 17.209622] usbcore: registered new interface driver hub
[ 17.209899] usbcore: registered new device driver usb
[ 17.210277] PCI: Probing PCI hardware
[ 17.210350] PCI: Probing PCI hardware (bus 00)
[ 17.210393] PM: Adding info for No Bus:pci0000:00
[ 17.211370] PM: Adding info for pci:0000:00:01.0
[ 17.211615] PM: Adding info for pci:0000:00:01.1
[ 17.211864] PM: Adding info for pci:0000:00:01.2
[ 17.212119] PM: Adding info for pci:0000:00:0c.0
[ 17.212364] PM: Adding info for pci:0000:00:0c.1
[ 17.212605] PM: Adding info for pci:0000:00:0c.2
[ 17.212840] PM: Adding info for pci:0000:00:0f.0
[ 17.213103] PM: Adding info for pci:0000:00:0f.3
[ 17.213334] PM: Adding info for pci:0000:00:0f.4
[ 17.213568] PM: Adding info for pci:0000:00:0f.5
[ 17.214407] PM: Adding info for No Bus:mem
[ 17.214613] PM: Adding info for No Bus:kmem
[ 17.214801] PM: Adding info for No Bus:null
[ 17.215012] PM: Adding info for No Bus:port
[ 17.215194] PM: Adding info for No Bus:zero
[ 17.215370] PM: Adding info for No Bus:full
[ 17.215558] PM: Adding info for No Bus:random
[ 17.215757] PM: Adding info for No Bus:urandom
[ 17.215935] PM: Adding info for No Bus:kmsg
[ 17.216271] NET: Registered protocol family 2
[ 17.220497] Time: tsc clocksource has been installed.
[ 17.220766] Switched to high resolution mode on CPU 0
[ 17.293877] IP route cache hash table entries:
2048 (order: 1, 8192 bytes)
[ 17.294193] TCP established hash table entries:
8192 (order: 5, 163840 bytes)
[ 17.294776] TCP bind hash table entries:
8192 (order: 5, 163840 bytes)
[ 17.295449] TCP: Hash tables configured
(established 8192 bind 8192)
[ 17.295523] TCP reno registered
[ 17.321783] checking if image is initramfs... it is
[ 19.924008] Freeing initrd memory: 2436k freed
[ 19.972795] PM: Adding info for No Bus:msr0
[ 19.980952] PM: Adding info for platform:serial8250.0
[ 19.989083] PM: Adding info for platform:pcspkr
[ 19.997374] input: OLPC PM as /class/input/input0
[ 20.005725] input: OLPC lid switch as /class/input/input1
[ 20.014238] input: OLPC ebook switch as /class/input/input2
[ 20.014326] SCI is mapped to IRQ 3
[ 20.014406] Set IRQ 3 for 6
[ 20.014478] Set IRQ 3 for 7
[ 20.014903] olpc-ec: running cmd 0x84
[ 20.016931] olpc-ec: received 0x20
[ 20.016946] olpc-pm: SCI 0x20 received
[ 20.016963] olpc-ec: running cmd 0x84
[ 20.019992] olpc-ec: received 0x0
[ 20.020007] olpc-pm: SCI 0x0 received
[ 20.020024] olpc-ec: running cmd 0x2a
[ 20.023053] olpc-ec: received 0x0
[ 20.037229] PM: Adding info for No Bus:snapshot
[ 20.042747] Total HugeTLB memory allocated, 0
[ 20.043159] VFS: Disk quotas dquot_6.5.1
[ 20.043276] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 20.043859] JFFS2 version 2.2. (NAND)
(SUMMARY) © 2001-2006 Red Hat, Inc.
[ 20.148191] PROM: Built device tree with 36187 bytes of memory.
[ 20.148493] io scheduler noop registered
[ 20.148642] io scheduler cfq registered (default)
[ 20.148728] Boot video device is 0000:00:01.1
[ 20.173410] lxfb 0000:00:01.1: 16384 KB of video
memory at 0xfd000000
[ 20.187048] PM: Adding info for No Bus:fb0
[ 20.195646] PM: Adding info for No Bus:vtcon1
[ 20.253012] Console: switching to colour frame buffer device 150x56
[ 20.297299] fb0: Geode LX frame buffer device
[ 20.313972] PM: Adding info for platform:vesafb.0
[ 20.314184] PM: Adding info for No Bus:tty
[ 20.320726] PM: Adding info for No Bus:console
[ 20.323409] PM: Adding info for No Bus:ptmx
[ 20.333267] PM: Adding info for No Bus:tty0
[ 20.341536] PM: Adding info for No Bus:vcs
[ 20.349700] PM: Adding info for No Bus:vcsa
[ 20.358032] PM: Adding info for No Bus:tty1
[ 20.366271] PM: Adding info for No Bus:tty2
[ 20.374506] PM: Adding info for No Bus:tty3
[ 20.382679] PM: Adding info for No Bus:tty4
[ 20.390953] PM: Adding info for No Bus:tty5
[ 20.394022] PM: Adding info for No Bus:tty6
[ 20.396786] PM: Adding info for No Bus:tty7
[ 20.413390] PM: Adding info for No Bus:tty8
[ 20.421596] PM: Adding info for No Bus:tty9
[ 20.429804] PM: Adding info for No Bus:tty10
[ 20.438126] PM: Adding info for No Bus:tty11
[ 20.446330] PM: Adding info for No Bus:tty12
[ 20.454601] PM: Adding info for No Bus:tty13
[ 20.462860] PM: Adding info for No Bus:tty14
[ 20.471079] PM: Adding info for No Bus:tty15
[ 20.479324] PM: Adding info for No Bus:tty16
[ 20.487228] PM: Adding info for No Bus:tty17
[ 20.489908] PM: Adding info for No Bus:tty18
[ 20.503736] PM: Adding info for No Bus:tty19
[ 20.511949] PM: Adding info for No Bus:tty20
[ 20.520152] PM: Adding info for No Bus:tty21
[ 20.528535] PM: Adding info for No Bus:tty22
[ 20.536785] PM: Adding info for No Bus:tty23
[ 20.545034] PM: Adding info for No Bus:tty24
[ 20.553292] PM: Adding info for No Bus:tty25
[ 20.561799] PM: Adding info for No Bus:tty26
[ 20.570104] PM: Adding info for No Bus:tty27
[ 20.578358] PM: Adding info for No Bus:tty28
[ 20.581316] PM: Adding info for No Bus:tty29
[ 20.584050] PM: Adding info for No Bus:tty30
[ 20.602629] PM: Adding info for No Bus:tty31
[ 20.611001] PM: Adding info for No Bus:tty32
[ 20.619131] PM: Adding info for No Bus:tty33
[ 20.627599] PM: Adding info for No Bus:tty34
[ 20.635920] PM: Adding info for No Bus:tty35
[ 20.644196] PM: Adding info for No Bus:tty36
[ 20.652581] PM: Adding info for No Bus:tty37
[ 20.661026] PM: Adding info for No Bus:tty38
[ 20.669189] PM: Adding info for No Bus:tty39
[ 20.677686] PM: Adding info for No Bus:tty40
[ 20.683986] PM: Adding info for No Bus:tty41
[ 20.686742] PM: Adding info for No Bus:tty42
[ 20.706876] PM: Adding info for No Bus:tty43
[ 20.715177] PM: Adding info for No Bus:tty44
[ 20.723422] PM: Adding info for No Bus:tty45
[ 20.731740] PM: Adding info for No Bus:tty46
[ 20.740022] PM: Adding info for No Bus:tty47
[ 20.748386] PM: Adding info for No Bus:tty48
[ 20.756832] PM: Adding info for No Bus:tty49
[ 20.765235] PM: Adding info for No Bus:tty50
[ 20.773522] PM: Adding info for No Bus:tty51
[ 20.781850] PM: Adding info for No Bus:tty52
[ 20.784825] PM: Adding info for No Bus:tty53
[ 20.787570] PM: Adding info for No Bus:tty54
[ 20.806971] PM: Adding info for No Bus:tty55
[ 20.815225] PM: Adding info for No Bus:tty56
[ 20.823575] PM: Adding info for No Bus:tty57
[ 20.831871] PM: Adding info for No Bus:tty58
[ 20.840317] PM: Adding info for No Bus:tty59
[ 20.848652] PM: Adding info for No Bus:tty60
[ 20.856953] PM: Adding info for No Bus:tty61
[ 20.865500] PM: Adding info for No Bus:tty62
[ 20.873839] PM: Adding info for No Bus:tty63
[ 20.882118] PM: Adding info for No Bus:nvram
[ 20.890469] Non-volatile memory driver v1.2
[ 20.890811] AMD Geode RNG detected
[ 20.891111] PM: Adding info for No Bus:hw_random
[ 20.893964] Serial: 8250/16550 driver $Revision: 1.90 $
1 ports, IRQ sharing enabled
[ 20.894583] PM: Adding info for platform:serial8250
[ 20.894732] PM: Adding info for No Bus:ttyS0
[ 20.916752] PM: Removing info for No Bus:ttyS0
[ 20.924999] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 20.925617] PM: Adding info for No Bus:ttyS0
[ 20.933882] serial8250 serial8250.0: unable to register port
at index 1 (IO2f8 MEM0 IRQ3): -28
[ 20.934507] serial8250 serial8250.0: unable to register port
at index 2 (IO3e8 MEM0 IRQ4): -28
[ 20.935107] serial8250 serial8250.0: unable to register port
at index 3 (IO2e8 MEM0 IRQ3): -28
[ 21.071076] RAMDISK driver initialized: 16 RAM disks of
16384K size 1024 blocksize
[ 21.071838] PM: Adding info for No Bus:lo
[ 21.077142] Linux video capture interface: v2.00
[ 21.077550] Marvell M88ALP01 'CAFE' Camera Controller version 2
[ 21.080700] PCI: Enabling device 0000:00:0c.2 (0000 -> 0002)
[ 21.106698] PM: Adding info for No Bus:i2c-0
[ 21.107304] i2c-adapter i2c-0: SMBus Quick command not
supported, can't probe for chips
[ 21.107880] olpc-dcon: No DCON found on SMBus
[ 21.154815] OmniVision ov7670 sensor driver, at your service
[ 21.491200] PM: Adding info for i2c:0-0042
[ 21.542308] NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc
(Hynix NAND 512MiB 3,3V 8-bit)
[ 21.542921] 2 NAND chips detected
[ 21.543334] Bad block table found at page 524224, version 0x01
[ 21.543656] Bad block table found at page 524160, version 0x01
[ 21.543975] nand_read_bbt: Bad block at 0x1a7c0000
[ 21.544039] nand_read_bbt: Bad block at 0x20ee0000
[ 21.544072] nand_read_bbt: Bad block at 0x22ec0000
[ 21.544184] nand_read_bbt: Bad block at 0x2fe40000
[ 21.544209] nand_read_bbt: Bad block at 0x30ee0000
[ 21.544245] nand_read_bbt: Bad block at 0x335e0000
[ 21.544428] Searching for RedBoot partition table in NAND
512MiB 3,3V 8-bit at offset 0xfd80000
[ 21.551728] No RedBoot partition table detected in NAND
512MiB 3,3V 8-bit
[ 21.560593] PCI: Setting latency timer of device 0000:00:0f.5 to 64
[ 21.560619] ehci_hcd 0000:00:0f.5: EHCI Host Controller
[ 21.569396] ehci_hcd 0000:00:0f.5: new USB bus registered,
assigned bus number 1
[ 21.570020] PCI: cache line size of 32 is not supported
by device 0000:00:0f.5
[ 21.593793] ehci_hcd 0000:00:0f.5: irq 10, io mem 0xfe01b000
[ 21.594204] ehci_hcd 0000:00:0f.5: USB 2.0 started,
EHCI 1.00, driver 10 Dec 2004
[ 21.594866] PM: Adding info for usb:usb1
[ 21.603367] PM: Adding info for No Bus:usbdev1.1_ep00
[ 21.611659] usb usb1: configuration #1 chosen from 1 choice
[ 21.612157] PM: Adding info for usb:1-0:1.0
[ 21.620411] hub 1-0:1.0: USB hub found
[ 21.620737] hub 1-0:1.0: 4 ports detected
[ 21.744740] PM: Adding info for No Bus:usbdev1.1_ep81
[ 21.745222] ohci_hcd: 2006 August 04 USB 1.1
'Open' Host Controller (OHCI) Driver
[ 21.753553] PCI: Setting latency timer of
device 0000:00:0f.4 to 64
[ 21.753577] ohci_hcd 0000:00:0f.4: OHCI Host Controller
[ 21.772546] ohci_hcd 0000:00:0f.4: new USB bus registered,
assigned bus number 2
[ 21.789050] ohci_hcd 0000:00:0f.4: irq 10, io mem 0xfe01a000
[ 21.893081] PM: Adding info for usb:usb2
[ 21.893600] PM: Adding info for No Bus:usbdev2.1_ep00
[ 21.901809] usb usb2: configuration #1 chosen from 1 choice
[ 21.918048] PM: Adding info for usb:2-0:1.0
[ 21.928702] hub 2-0:1.0: USB hub found
[ 21.944733] hub 2-0:1.0: 4 ports detected
[ 21.976683] hub_port_wait_reset: portstatus=503 portchange=10
[ 22.055617] usb 1-1: new high speed USB device
using ehci_hcd and address 2
[ 22.071650] PM: Adding info for No Bus:usbdev2.1_ep81
[ 22.072179] Initializing USB Mass Storage driver...
[ 22.137295] hub_port_wait_reset: portstatus=503 portchange=10
[ 22.250370] PM: Adding info for usb:1-1
[ 22.250871] PM: Adding info for No Bus:usbdev1.2_ep00
[ 22.259361] usb 1-1: configuration #1 chosen from 1 choice
[ 22.278217] PM: Adding info for usb:1-1:1.0
[ 22.283940] PM: Adding info for No Bus:usbdev1.2_ep02
[ 22.292419] PM: Adding info for No Bus:usbdev1.2_ep83
[ 22.295290] usbcore: registered new interface driver usb-storage
[ 22.311647] USB Mass Storage support registered.
[ 22.337322] usbcore: registered new interface driver libusual
[ 22.358169] PM: Adding info for platform:i8042
[ 22.405955] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 22.422777] PM: Adding info for serio:serio0
[ 22.422960] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 22.445317] PM: Adding info for serio:serio1
[ 22.537804] input: AT Translated Set 2 keyboard as /class/input/input3
[ 22.582020] PM: Adding info for No Bus:rtc0
[ 22.590337] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 22.607303] rtc0: alarms up to one day
[ 23.077262] drivers/input/mouse/olpc.c: OLPC touchpad revision 0x50.
[ 23.574303] drivers/input/mouse/olpc.c: OLPC touchpad revision 0x50.
[ 23.701452] input: OLPC ALPS GlideSensor as /class/input/input4
[ 23.783821] input: OLPC ALPS PenTablet as /class/input/input5
[ 23.818215] PM: Adding info for No Bus:i2c-1
[ 23.819599] PM: Adding info for i2c:1-000d
[ 23.820234] olpc-dcon: Discovered DCON version 2
[ 23.836652] Set IRQ 6 for 2
[ 23.855214] PM: Adding info for platform:dcon
[ 23.864032] olpc-ec: running cmd 0x15
[ 23.867066] olpc-ec: received 0x13
[ 23.867298] PM: Adding info for platform:olpc-battery.0
[ 23.867401] PM: Adding info for No Bus:olpc-ac
[ 23.870111] olpc-ec: running cmd 0x15
[ 23.872143] olpc-ec: received 0x13
[ 23.872189] olpc-ec: running cmd 0x15
[ 23.875219] olpc-ec: received 0x13
[ 23.875561] PM: Adding info for No Bus:olpc-battery
[ 23.884801] olpc-ec: running cmd 0x15
[ 23.886833] olpc-ec: received 0x13
[ 23.886882] olpc-ec: running cmd 0x15
[ 23.890915] olpc-ec: received 0x13
[ 23.891111] olpc-ec: running cmd 0x15
[ 23.894141] olpc-ec: received 0x13
[ 23.894163] olpc-ec: running cmd 0x15
[ 23.897192] olpc-ec: received 0x13
[ 23.897209] olpc-ec: running cmd 0x1f
[ 23.900238] olpc-ec: received 0x0
[ 23.900361] olpc-ec: running cmd 0x15
[ 23.904393] olpc-ec: received 0x13
[ 23.904410] olpc-ec: running cmd 0x18
[ 23.907438] olpc-ec: sending cmd arg 0x5f
[ 23.910467] olpc-ec: received 0x22
[ 23.910615] olpc-ec: running cmd 0x15
[ 23.913644] olpc-ec: received 0x13
[ 23.913661] olpc-ec: running cmd 0x10
[ 23.916690] olpc-ec: received 0x57
[ 23.919716] olpc-ec: received 0xf2
[ 23.919739] olpc-ec: running cmd 0x15
[ 23.922769] olpc-ec: received 0x13
[ 23.922868] olpc-ec: running cmd 0x11
[ 23.926899] olpc-ec: received 0x0
[ 23.929925] olpc-ec: received 0x1
[ 23.930040] olpc-ec: running cmd 0x15
[ 23.933070] olpc-ec: received 0x13
[ 23.933086] olpc-ec: running cmd 0x16
[ 23.936116] olpc-ec: received 0x61
[ 23.936137] olpc-ec: running cmd 0x15
[ 23.939166] olpc-ec: received 0x13
[ 23.939288] olpc-ec: running cmd 0x15
[ 23.943321] olpc-ec: received 0x13
[ 23.943337] olpc-ec: running cmd 0x13
[ 23.946366] olpc-ec: received 0x1f
[ 23.949392] olpc-ec: received 0x70
[ 23.949510] olpc-ec: running cmd 0x15
[ 23.952539] olpc-ec: received 0x13
[ 23.952556] olpc-ec: running cmd 0x14
[ 23.956588] olpc-ec: received 0x21
[ 23.959613] olpc-ec: received 0x0
[ 23.959732] olpc-ec: running cmd 0x15
[ 23.962762] olpc-ec: received 0x13
[ 23.962778] olpc-ec: running cmd 0x12
[ 23.965808] olpc-ec: received 0x16
[ 23.968833] olpc-ec: received 0x3d
[ 23.968947] olpc-ec: running cmd 0x15
[ 23.971976] olpc-ec: received 0x13
[ 23.971993] olpc-ec: running cmd 0x18
[ 23.975021] olpc-ec: sending cmd arg 0x5f
[ 23.979052] olpc-ec: received 0x22
[ 23.979168] olpc-ec: running cmd 0x15
[ 23.982197] olpc-ec: received 0x13
[ 23.982214] olpc-ec: running cmd 0x17
[ 23.985243] olpc-ec: received 0x32
[ 23.988269] olpc-ec: received 0xb8
[ 23.991294] olpc-ec: received 0xc
[ 23.994319] olpc-ec: received 0x0
[ 23.997345] olpc-ec: received 0x0
[ 24.001373] olpc-ec: received 0x0
[ 24.003395] olpc-ec: received 0x3d
[ 24.006421] olpc-ec: received 0xff
[ 24.015307] sdhci: Secure Digital Host Controller Interface driver
[ 24.031863] sdhci: Copyright(c) Pierre Ossman
[ 24.064464] sdhci: SDHCI controller found at 0000:00:0c.1 [11ab:4101]
(rev 10)
[ 24.081135] PCI: Enabling device 0000:00:0c.1 (0000 -> 0002)
[ 24.097593] sdhci: Invalid iomem size. You may experience problems.
[ 24.114197] PM: Adding info for No Bus:mmc0
[ 24.126482] mmc0: SDHCI at 0xfe024000 irq 11 DMA
[ 24.153520] geode-aes: GEODE AES engine enabled.
[ 24.181371] usbcore: registered new interface driver hiddev
[ 24.206480] usbcore: registered new interface driver usbhid
[ 24.222931] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 24.239474] Advanced Linux Sound Architecture Driver
Version 1.0.14 (Thu May 31 09:03:25 2007 UTC).
[ 24.256363] PM: Adding info for No Bus:timer
[ 24.272844] PCI: Setting latency timer of device 0000:00:0f.3 to 64
[ 24.276672] Failure reading codec reg 0x7e,Last value=0x7e805368
[ 24.293543] Failure reading codec reg 0x7e,Last value=0x7e805368
[ 24.316828] PM: Adding info for No Bus:card0
[ 24.325171] PM: Adding info for No Bus:pcmC0D0p
[ 24.333469] PM: Adding info for No Bus:pcmC0D0c
[ 24.341834] PM: Adding info for ac97:0-0:AD1888
[ 24.350118] PM: Adding info for No Bus:controlC0
[ 24.358450] ALSA device list:
[ 24.374646] #0: CS5535 Audio cs5535audio at 0x1480, irq 5
[ 24.391483] TCP bic registered
[ 24.407190] Initializing XFRM netlink socket
[ 24.422783] NET: Registered protocol family 1
[ 24.438280] NET: Registered protocol family 10
[ 24.453549] lo: Disabled Privacy Extensions
[ 24.468529] Mobile IPv6
[ 24.483247] NET: Registered protocol family 17
[ 24.498030] Using IPI Shortcut mode
[ 24.513227] Freeing unused kernel memory: 164k freed
[ 24.527907] Write protecting the kernel read-only data: 624k
[ 24.542964] PM: Adding info for No Bus:vcs1
[ 24.551620] PM: Adding info for No Bus:vcsa1
[ 31.618904] JFFS2 notice: (615) jffs2_build_xattr_subsystem:
complete building xattr subsystem, 0 of xdatum
(0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 33.188401] PM: Removing info for No Bus:vcs1
[ 33.188692] PM: Removing info for No Bus:vcsa1
[ 33.188984] PM: Adding info for No Bus:vcs1
[ 33.189182] PM: Adding info for No Bus:vcsa1
[ 33.189453] PM: Removing info for No Bus:vcs1
[ 33.189656] PM: Removing info for No Bus:vcsa1
[ 33.193383] PM: Adding info for No Bus:vcs1
[ 33.193604] PM: Adding info for No Bus:vcsa1
[ 33.193950] PM: Removing info for No Bus:vcs1
[ 33.194162] PM: Removing info for No Bus:vcsa1
[ 33.194438] PM: Adding info for No Bus:vcs1
[ 33.194637] PM: Adding info for No Bus:vcsa1
[ 33.195028] PM: Removing info for No Bus:vcs1
[ 33.195238] PM: Removing info for No Bus:vcsa1
[ 33.195510] PM: Adding info for No Bus:vcs1
[ 33.195710] PM: Adding info for No Bus:vcsa1
[ 33.211829] PM: Removing info for No Bus:vcs1
[ 33.212047] PM: Removing info for No Bus:vcsa1
[ 33.213986] PM: Adding info for No Bus:vcs1
[ 33.217765] PM: Adding info for No Bus:vcsa1
[ 37.847326] olpc-ec: running cmd 0x15
[ 37.848354] olpc-ec: received 0x13
[ 37.848495] olpc-ec: running cmd 0x15
[ 37.851525] olpc-ec: received 0x13
[ 37.851636] olpc-ec: running cmd 0x15
[ 37.853663] olpc-ec: received 0x13
[ 37.853685] olpc-ec: running cmd 0x15
[ 37.857717] olpc-ec: received 0x13
[ 37.857734] olpc-ec: running cmd 0x1f
[ 37.864774] olpc-ec: received 0x0
[ 37.864924] olpc-ec: running cmd 0x15
[ 37.867953] olpc-ec: received 0x13
[ 37.867970] olpc-ec: running cmd 0x18
[ 37.870998] olpc-ec: sending cmd arg 0x5f
[ 37.874027] olpc-ec: received 0x22
[ 37.874150] olpc-ec: running cmd 0x15
[ 37.876177] olpc-ec: received 0x13
[ 37.876194] olpc-ec: running cmd 0x10
[ 37.879223] olpc-ec: received 0x57
[ 37.881246] olpc-ec: received 0xf6
[ 37.881353] olpc-ec: running cmd 0x15
[ 37.884382] olpc-ec: received 0x13
[ 37.884399] olpc-ec: running cmd 0x11
[ 37.888431] olpc-ec: received 0x0
[ 37.891456] olpc-ec: received 0x2
[ 37.891573] olpc-ec: running cmd 0x15
[ 37.894602] olpc-ec: received 0x13
[ 37.894619] olpc-ec: running cmd 0x16
[ 37.897648] olpc-ec: received 0x61
[ 37.897671] olpc-ec: running cmd 0x15
[ 37.901702] olpc-ec: received 0x13
[ 37.901825] olpc-ec: running cmd 0x15
[ 37.904854] olpc-ec: received 0x13
[ 37.904871] olpc-ec: running cmd 0x13
[ 37.907900] olpc-ec: received 0x1f
[ 37.910926] olpc-ec: received 0x72
[ 37.911039] olpc-ec: running cmd 0x15
[ 37.914068] olpc-ec: received 0x13
[ 37.914085] olpc-ec: running cmd 0x14
[ 37.918117] olpc-ec: received 0x21
[ 37.921142] olpc-ec: received 0x0
[ 37.921262] olpc-ec: running cmd 0x15
[ 37.924291] olpc-ec: received 0x13
[ 37.924308] olpc-ec: running cmd 0x12
[ 37.927337] olpc-ec: received 0x16
[ 37.930363] olpc-ec: received 0x3d
[ 37.930476] olpc-ec: running cmd 0x15
[ 37.933506] olpc-ec: received 0x13
[ 37.933522] olpc-ec: running cmd 0x18
[ 37.936551] olpc-ec: sending cmd arg 0x5f
[ 37.940582] olpc-ec: received 0x22
[ 37.958930] olpc-ec: running cmd 0x15
[ 37.960961] olpc-ec: received 0x13
[ 37.960978] olpc-ec: running cmd 0x17
[ 37.965010] olpc-ec: received 0x32
[ 37.968036] olpc-ec: received 0xb8
[ 37.971061] olpc-ec: received 0xc
[ 37.974087] olpc-ec: received 0x0
[ 37.977112] olpc-ec: received 0x0
[ 37.980138] olpc-ec: received 0x0
[ 37.983163] olpc-ec: received 0x3d
[ 37.986189] olpc-ec: received 0xff
[ 38.352340] mice: PS/2 mouse device common for all mice
[ 38.885276] cs5535_gpio: base=0x1000 mask=0xb003c66 major=251
[ 39.475909] ieee80211_crypt: registered algorithm 'NULL'
[ 39.507957] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 39.507983] ieee80211: Copyright (C) 2004-2005
Intel Corporation <jketreno at linux.intel.com>
[ 39.596959] PM: Adding info for No Bus:msh0
[ 39.597614] PM: Adding info for No Bus:1-1
[ 40.579418] PM: Removing info for No Bus:1-1
[ 41.457599] PM: Adding info for No Bus:eth0
[ 41.457886] libertas: eth0: Marvell WLAN 802.11 adapter
[ 41.458206] usbcore: registered new interface driver usb8xxx
[ 42.042694] i2c /dev entries driver
[ 42.046693] PM: Adding info for No Bus:i2c-0
[ 42.117513] PM: Adding info for No Bus:i2c-1
[ 45.296613] PM: Removing info for No Bus:vcs1
[ 45.297231] PM: Removing info for No Bus:vcsa1
[ 45.303346] PM: Adding info for No Bus:vcs1
[ 45.303468] PM: Adding info for No Bus:vcsa1
[ 45.303700] PM: Removing info for No Bus:vcs1
[ 45.303802] PM: Removing info for No Bus:vcsa1
[ 45.303974] PM: Adding info for No Bus:vcs1
[ 45.304067] PM: Adding info for No Bus:vcsa1
[ 45.304349] PM: Removing info for No Bus:vcs1
[ 45.304445] PM: Removing info for No Bus:vcsa1
[ 45.304608] PM: Adding info for No Bus:vcs1
[ 45.304700] PM: Adding info for No Bus:vcsa1
[ 45.325372] PM: Removing info for No Bus:vcs1
[ 45.325604] PM: Removing info for No Bus:vcsa1
[ 45.326665] PM: Adding info for No Bus:vcs1
[ 45.326767] PM: Adding info for No Bus:vcsa1
[ 58.708563] olpc-ec: running cmd 0x15
[ 58.711606] olpc-ec: received 0x13
[ 58.719309] olpc-ec: running cmd 0x15
[ 58.722350] olpc-ec: received 0x13
[ 58.722768] olpc-ec: running cmd 0x18
[ 58.725801] olpc-ec: sending cmd arg 0x5f
[ 58.728831] olpc-ec: received 0x22
[ 58.729596] olpc-ec: running cmd 0x15
[ 58.732633] olpc-ec: received 0x13
[ 58.732974] olpc-ec: running cmd 0x18
[ 58.735004] olpc-ec: sending cmd arg 0x5f
[ 58.739037] olpc-ec: received 0x22
[ 58.739793] olpc-ec: running cmd 0x15
[ 58.741827] olpc-ec: received 0x13
[ 58.742168] olpc-ec: running cmd 0x18
[ 58.745202] olpc-ec: sending cmd arg 0x5f
[ 58.748232] olpc-ec: received 0x22
[ 58.851864] olpc-ec: running cmd 0x15
[ 58.854905] olpc-ec: received 0x13
[ 58.855522] olpc-ec: running cmd 0x15
[ 58.857555] olpc-ec: received 0x13
[ 58.857900] olpc-ec: running cmd 0x16
[ 58.860935] olpc-ec: received 0x61
[ 58.861533] olpc-ec: running cmd 0x15
[ 58.864569] olpc-ec: received 0x13
[ 58.864915] olpc-ec: running cmd 0x10
[ 58.867950] olpc-ec: received 0x57
[ 58.870977] olpc-ec: received 0xf4
[ 58.871787] olpc-ec: running cmd 0x15
[ 58.873820] olpc-ec: received 0x13
[ 58.874166] olpc-ec: running cmd 0x11
[ 58.877200] olpc-ec: received 0xff
[ 58.880228] olpc-ec: received 0xff
[ 58.880974] olpc-ec: running cmd 0x15
[ 58.883007] olpc-ec: received 0x13
[ 59.214588] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 61.325722] ADDRCONF(NETDEV_CHANGE): msh0: link becomes ready
[ 62.153076] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 63.324932] PM: Adding info for No Bus:vcs2
[ 63.325781] PM: Adding info for No Bus:vcsa2
[ 63.328527] PM: Removing info for No Bus:vcs2
[ 63.329314] PM: Removing info for No Bus:vcsa2
[ 63.330488] PM: Adding info for No Bus:vcs2
[ 63.331112] PM: Adding info for No Bus:vcsa2
[ 64.965199] PM: Adding info for No Bus:vcs3
[ 64.966044] PM: Adding info for No Bus:vcsa3
[ 72.263790] msh0: no IPv6 routers present
[ 72.827659] eth0: no IPv6 routers present
[ 94.891266] ADDRCONF(NETDEV_CHANGE): msh0: link becomes ready
[ 105.299153] msh0: no IPv6 routers present
[ 118.020122] ADDRCONF(NETDEV_CHANGE): msh0: link becomes ready
[ 128.167804] msh0: no IPv6 routers present
[ 140.381618] ADDRCONF(NETDEV_CHANGE): msh0: link becomes ready
[ 150.616129] msh0: no IPv6 routers present
[ 156.143026] eth0: no IPv6 routers present
[ 156.495992] ADDRCONF(NETDEV_CHANGE): msh0: link becomes ready
[ 167.338875] msh0: no IPv6 routers present
[ 181.119798] JFFS2 notice: (639) check_node_data:
wrong data CRC in data node at 0x1decb9e4:
read 0xc5b63c3c, calculated 0x92937077.
[ 1434.886695] PM: Removing info for No Bus:vcs2
[ 1434.886858] PM: Removing info for No Bus:vcsa2
[ 1434.983120] PM: Adding info for No Bus:vcs2
[ 1434.983261] PM: Adding info for No Bus:vcsa2
[ 1434.986947] PM: Removing info for No Bus:vcs2
[ 1434.987084] PM: Removing info for No Bus:vcsa2
[ 1434.987284] PM: Adding info for No Bus:vcs2
[ 1434.987387] PM: Adding info for No Bus:vcsa2
}}}
--
Ticket URL: <http://dev.laptop.org/ticket/6742#comment:5>
One Laptop Per Child <http://laptop.org/>
OLPC bug tracking system
More information about the Bugs
mailing list