#3948 NORM Never A: suspend to RAM doesn't work

Zarro Boogs per Child bugtracker at laptop.org
Sun Sep 30 09:03:42 EDT 2007


#3948: suspend to RAM doesn't work
---------------------+------------------------------------------------------
  Reporter:  ssb22   |       Owner:  dilinger      
      Type:  defect  |      Status:  new           
  Priority:  normal  |   Milestone:  Never Assigned
 Component:  distro  |     Version:                
Resolution:          |    Keywords:                
  Verified:  0       |  
---------------------+------------------------------------------------------

Comment(by ssb22):

 Yes I was root.  And here's the dmesg output:

 [    0.000000] Linux version 2.6.22-20070919.2.olpc.9ecd27321ab3be0
 (dilinger at fc6.laptop.org) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51))
 #1 PREEMPT Wed Sep 19 01:10:30 EDT 2007
 [    0.000000] BIOS-provided physical RAM map:
 [    0.000000]  BIOS-e801: 0000000000000000 - 000000000009f000 (usable)
 [    0.000000]  BIOS-e801: 0000000000100000 - 000000000edfd000 (usable)
 [    0.000000] 237MB LOWMEM available.
 [    0.000000] Entering add_active_range(0, 0, 60925) 0 entries of 256
 used
 [    0.000000] Zone PFN ranges:
 [    0.000000]   DMA             0 ->     4096
 [    0.000000]   Normal       4096 ->    60925
 [    0.000000] early_node_map[1] active PFN ranges
 [    0.000000]     0:        0 ->    60925
 [    0.000000] On node 0 totalpages: 60925
 [    0.000000]   DMA zone: 32 pages used for memmap
 [    0.000000]   DMA zone: 0 pages reserved
 [    0.000000]   DMA zone: 4064 pages, LIFO batch:0
 [    0.000000]   Normal zone: 443 pages used for memmap
 [    0.000000]   Normal zone: 56386 pages, LIFO batch:15
 [    0.000000] DMI not present or invalid.
 [    0.000000] Allocating PCI resources starting at 10000000 (gap:
 0edfd000:f1203000)
 [    0.000000] Built 1 zonelists.  Total pages: 60450
 [    0.000000] Kernel command line: ro root=mtd0 rootfstype=jffs2
 console=ttyS0,115200 console=tty0 fbcon=font:SUN12x22
 [    0.000000] Initializing CPU#0
 [    0.000000] CPU 0 irqstacks, hard=c074a000 soft=c0749000
 [    0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
 [    0.000000] Detected 430.952 MHz processor.
 [   28.066189] Console: colour EGA 80x25
 [   28.067220] Dentry cache hash table entries: 32768 (order: 5, 131072
 bytes)
 [   28.067886] Inode-cache hash table entries: 16384 (order: 4, 65536
 bytes)
 [   28.105559] Memory: 228120k/243700k available (2325k kernel code,
 15044k reserved, 842k data, 168k init, 0k highmem)
 [   28.105693] virtual kernel memory layout:
 [   28.105703]     fixmap  : 0xffffd000 - 0xfffff000   (   8 kB)
 [   28.105716]     vmalloc : 0xcf800000 - 0xffffb000   ( 775 MB)
 [   28.105729]     lowmem  : 0xc0000000 - 0xcedfd000   ( 237 MB)
 [   28.105741]       .init : 0xc071a000 - 0xc0744000   ( 168 kB)
 [   28.105754]       .data : 0xc0645709 - 0xc07181b4   ( 842 kB)
 [   28.105767]       .text : 0xc0400000 - 0xc0645709   (2325 kB)
 [   28.106167] Checking if this processor honours the WP bit even in
 supervisor mode... Ok.
 [   28.257087] Calibrating delay using timer specific routine.. 862.98
 BogoMIPS (lpj=4314915)
 [   28.257430] Security Framework v1.0.0 initialized
 [   28.257507] SELinux:  Initializing.
 [   28.257651] SELinux:  Starting in permissive mode
 [   28.257680] selinux_register_security:  Registering secondary module
 capability
 [   28.257764] Capability LSM initialized as secondary
 [   28.257940] Mount-cache hash table entries: 512
 [   28.258559] CPU: After generic identify, caps: 0088a93d c0c0a13d
 00000000 00000000 00000000 00000000 00000000
 [   28.258619] CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32
 bytes/line)
 [   28.258697] CPU: L2 Cache: 128K (32 bytes/line)
 [   28.258767] CPU: After all inits, caps: 0088a93d c0c0a13d 00000000
 00000000 00000000 00000000 00000000
 [   28.258822] Compat vDSO mapped to ffffe000.
 [   28.258906] CPU: AMD Geode(TM) Integrated Processor by AMD PCS stepping
 02
 [   28.259114] Checking 'hlt' instruction... OK.
 [   28.297677] PM: Adding info for No Bus:platform
 [   28.298171] NET: Registered protocol family 16
 [   28.298293] geode-mfgpt:  Registered timer 0
 [   28.298379] mfgpt-timer:  registering the MFGT timer as a clock event.
 [   28.298747] geode-mfgpt:  8 timers available.
 [   28.298988] OLPC board with OpenFirmware: CL1   Q2C26  Q2C
 [   28.299128] ofw: revision string is too long!
 [   28.319259] olpc-ec:  timeout waiting for EC to quiesce!
 [   28.319424] OLPC board revision: Unknown (EC=0)
 [   28.319734] PM: Adding info for No Bus:vtcon0
 [   28.320041] PM: Adding info for platform:rtc_cmos
 [   28.320241] PM: Adding info for platform:powerbutton
 [   28.320435] PM: Adding info for platform:lid
 [   28.321126] PCI: Using configuration type OLPC
 [   28.321198] Setting up standard PCI resources
 [   28.327928] SCSI subsystem initialized
 [   28.328347] usbcore: registered new interface driver usbfs
 [   28.328605] usbcore: registered new interface driver hub
 [   28.328901] usbcore: registered new device driver usb
 [   28.329444] PCI: Probing PCI hardware
 [   28.329518] PCI: Probing PCI hardware (bus 00)
 [   28.329565] PM: Adding info for No Bus:pci0000:00
 [   28.330457] PM: Adding info for pci:0000:00:01.0
 [   28.330724] PM: Adding info for pci:0000:00:01.1
 [   28.330971] PM: Adding info for pci:0000:00:01.2
 [   28.331250] PM: Adding info for pci:0000:00:0c.0
 [   28.331515] PM: Adding info for pci:0000:00:0c.1
 [   28.331760] PM: Adding info for pci:0000:00:0c.2
 [   28.332021] PM: Adding info for pci:0000:00:0f.0
 [   28.332270] PM: Adding info for pci:0000:00:0f.3
 [   28.332544] PM: Adding info for pci:0000:00:0f.4
 [   28.332798] PM: Adding info for pci:0000:00:0f.5
 [   28.333708] PM: Adding info for No Bus:mem
 [   28.333927] PM: Adding info for No Bus:kmem
 [   28.334136] PM: Adding info for No Bus:null
 [   28.334343] PM: Adding info for No Bus:port
 [   28.334559] PM: Adding info for No Bus:zero
 [   28.334755] PM: Adding info for No Bus:full
 [   28.334957] PM: Adding info for No Bus:random
 [   28.335149] PM: Adding info for No Bus:urandom
 [   28.335353] PM: Adding info for No Bus:kmsg
 [   28.335723] NET: Registered protocol family 2
 [   28.339088] Time: tsc clocksource has been installed.
 [   28.339358] Switched to high resolution mode on CPU 0
 [   28.412472] IP route cache hash table entries: 2048 (order: 1, 8192
 bytes)
 [   28.412796] TCP established hash table entries: 8192 (order: 5, 163840
 bytes)
 [   28.413380] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
 [   28.414053] TCP: Hash tables configured (established 8192 bind 8192)
 [   28.414128] TCP reno registered
 [   28.440436] checking if image is initramfs... it is
 [   28.568844] Freeing initrd memory: 9164k freed
 [   28.613278] PM: Adding info for No Bus:msr0
 [   28.622108] PM: Adding info for platform:serial8250.0
 [   28.631156] PM: Adding info for platform:pcspkr
 [   28.640091] input: OLPC PM as /class/input/input0
 [   28.645767] input: OLPC lid switch as /class/input/input1
 [   28.648881] input: OLPC ebook switch as /class/input/input2
 [   28.648969] SCI is mapped to IRQ 3
 [   28.649049] Set IRQ 3 for 6
 [   28.649122] Set IRQ 3 for 7
 [   28.669336] olpc-ec:  timeout waiting for EC to quiesce!
 [   28.669601] Error getting the EC SCI mask: -5
 [   28.689732] olpc-ec:  timeout waiting for EC to quiesce!
 [   28.689988] Error setting the EC SCI mask: -5
 [   28.710371] olpc-ec:  timeout waiting for EC to quiesce!
 [   28.710623] Failed to clear SCI queue!
 [   28.730752] olpc-ec:  timeout waiting for EC to quiesce!
 [   28.731028] olpc-pm:  failed to get EBOOK state!
 [   28.757273] PM: Adding info for No Bus:snapshot
 [   28.766048] audit: initializing netlink socket (disabled)
 [   28.766179] audit(1191136232.230:1): initialized
 [   28.773069] Total HugeTLB memory allocated, 0
 [   28.773541] VFS: Disk quotas dquot_6.5.1
 [   28.773667] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
 [   28.774161] JFFS2 version 2.2. (NAND) (SUMMARY)  Â© 2001-2006 Red
 Hat, Inc.
 [   28.867405] PROM: Built device tree with 33895 bytes of memory.
 [   28.867665] SELinux:  Registering netfilter hooks
 [   28.868213] io scheduler noop registered
 [   28.868357] io scheduler cfq registered (default)
 [   28.868451] Boot video device is 0000:00:01.1
 [   28.898695] lxfb 0000:00:01.1: 16384 KB of video memory at 0xfd000000
 [   28.912425] PM: Adding info for No Bus:fb0
 [   28.921489] PM: Adding info for No Bus:vtcon1
 [   28.980658] Console: switching to colour frame buffer device 100x40
 [   29.027758] fb0: Geode LX frame buffer device
 [   29.038470] PM: Adding info for platform:vesafb.0
 [   29.038686] PM: Adding info for No Bus:tty
 [   29.047518] PM: Adding info for No Bus:console
 [   29.056459] PM: Adding info for No Bus:ptmx
 [   29.065306] PM: Adding info for No Bus:tty0
 [   29.074070] PM: Adding info for No Bus:vcs
 [   29.083127] PM: Adding info for No Bus:vcsa
 [   29.091987] PM: Adding info for No Bus:tty1
 [   29.100851] PM: Adding info for No Bus:tty2
 [   29.105770] PM: Adding info for No Bus:tty3
 [   29.108661] PM: Adding info for No Bus:tty4
 [   29.122637] PM: Adding info for No Bus:tty5
 [   29.131438] PM: Adding info for No Bus:tty6
 [   29.140219] PM: Adding info for No Bus:tty7
 [   29.149167] PM: Adding info for No Bus:tty8
 [   29.157980] PM: Adding info for No Bus:tty9
 [   29.166839] PM: Adding info for No Bus:tty10
 [   29.175655] PM: Adding info for No Bus:tty11
 [   29.184473] PM: Adding info for No Bus:tty12
 [   29.192671] PM: Adding info for No Bus:tty13
 [   29.195601] PM: Adding info for No Bus:tty14
 [   29.214845] PM: Adding info for No Bus:tty15
 [   29.223817] PM: Adding info for No Bus:tty16
 [   29.232559] PM: Adding info for No Bus:tty17
 [   29.241371] PM: Adding info for No Bus:tty18
 [   29.250438] PM: Adding info for No Bus:tty19
 [   29.259291] PM: Adding info for No Bus:tty20
 [   29.268149] PM: Adding info for No Bus:tty21
 [   29.272759] PM: Adding info for No Bus:tty22
 [   29.275627] PM: Adding info for No Bus:tty23
 [   29.292840] PM: Adding info for No Bus:tty24
 [   29.301643] PM: Adding info for No Bus:tty25
 [   29.310695] PM: Adding info for No Bus:tty26
 [   29.319530] PM: Adding info for No Bus:tty27
 [   29.328427] PM: Adding info for No Bus:tty28
 [   29.337307] PM: Adding info for No Bus:tty29
 [   29.346334] PM: Adding info for No Bus:tty30
 [   29.355182] PM: Adding info for No Bus:tty31
 [   29.359665] PM: Adding info for No Bus:tty32
 [   29.362583] PM: Adding info for No Bus:tty33
 [   29.385834] PM: Adding info for No Bus:tty34
 [   29.394633] PM: Adding info for No Bus:tty35
 [   29.403410] PM: Adding info for No Bus:tty36
 [   29.412513] PM: Adding info for No Bus:tty37
 [   29.421379] PM: Adding info for No Bus:tty38
 [   29.430211] PM: Adding info for No Bus:tty39
 [   29.439122] PM: Adding info for No Bus:tty40
 [   29.448028] PM: Adding info for No Bus:tty41
 [   29.457127] PM: Adding info for No Bus:tty42
 [   29.462634] PM: Adding info for No Bus:tty43
 [   29.465589] PM: Adding info for No Bus:tty44
 [   29.485526] PM: Adding info for No Bus:tty45
 [   29.494340] PM: Adding info for No Bus:tty46
 [   29.503145] PM: Adding info for No Bus:tty47
 [   29.512037] PM: Adding info for No Bus:tty48
 [   29.521145] PM: Adding info for No Bus:tty49
 [   29.530016] PM: Adding info for No Bus:tty50
 [   29.538918] PM: Adding info for No Bus:tty51
 [   29.547842] PM: Adding info for No Bus:tty52
 [   29.556791] PM: Adding info for No Bus:tty53
 [   29.565835] PM: Adding info for No Bus:tty54
 [   29.572570] PM: Adding info for No Bus:tty55
 [   29.585305] PM: Adding info for No Bus:tty56
 [   29.594133] PM: Adding info for No Bus:tty57
 [   29.603161] PM: Adding info for No Bus:tty58
 [   29.612013] PM: Adding info for No Bus:tty59
 [   29.620862] PM: Adding info for No Bus:tty60
 [   29.629956] PM: Adding info for No Bus:tty61
 [   29.638865] PM: Adding info for No Bus:tty62
 [   29.647827] PM: Adding info for No Bus:tty63
 [   29.652607] PM: Adding info for No Bus:nvram
 [   29.655448] Non-volatile memory driver v1.2
 [   29.656112] AMD Geode RNG detected
 [   29.656674] PM: Adding info for No Bus:hw_random
 [   29.669070] Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ
 sharing enabled
 [   29.670306] PM: Adding info for platform:serial8250
 [   29.670456] PM: Adding info for No Bus:ttyS0
 [   29.688146] PM: Removing info for No Bus:ttyS0
 [   29.697156] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
 [   29.698228] PM: Adding info for No Bus:ttyS0
 [   32.248757] serial8250 serial8250.0: unable to register port at index 1
 (IO2f8 MEM0 IRQ3): -28
 [   32.279302] serial8250 serial8250.0: unable to register port at index 2
 (IO3e8 MEM0 IRQ4): -28
 [   32.309280] serial8250 serial8250.0: unable to register port at index 3
 (IO2e8 MEM0 IRQ3): -28
 [   32.459126] RAMDISK driver initialized: 16 RAM disks of 16384K size
 1024 blocksize
 [   32.488205] PM: Adding info for No Bus:lo
 [   32.522052] Linux video capture interface: v2.00
 [   32.547941] Marvell M88ALP01 'CAFE' Camera Controller version 2
 [   32.576218] PCI: Enabling device 0000:00:0c.2 (0000 -> 0002)
 [   32.635591] PM: Adding info for No Bus:i2c-0
 [   32.644467] i2c-adapter i2c-0: SMBus Quick command not supported, can't
 probe for chips
 [   32.675000] olpc-dcon: No DCON found on SMBus
 [   32.746931] OmniVision ov7670 sensor driver, at your service
 [   33.107728] PM: Adding info for i2c:0-0042
 [   33.151962] NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix
 NAND 512MiB 3,3V 8-bit)
 [   33.184588] 2 NAND chips detected
 [   33.211802] Bad block table found at page 524224, version 0x01
 [   33.212032] Bad block table found at page 524160, version 0x01
 [   33.212539] nand_read_bbt: Bad block at 0x34760000
 [   33.221735] PCI: Setting latency timer of device 0000:00:0f.5 to 64
 [   33.221761] ehci_hcd 0000:00:0f.5: EHCI Host Controller
 [   33.260092] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus
 number 1
 [   33.292050] PCI: cache line size of 32 is not supported by device
 0000:00:0f.5
 [   33.324578] ehci_hcd 0000:00:0f.5: irq 10, io mem 0xfe01b000
 [   33.354287] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00, driver
 10 Dec 2004
 [   33.386205] PM: Adding info for usb:usb1
 [   33.393214] PM: Adding info for No Bus:usbdev1.1_ep00
 [   33.396155] usb usb1: configuration #1 chosen from 1 choice
 [   33.426238] PM: Adding info for usb:1-0:1.0
 [   33.433086] hub 1-0:1.0: USB hub found
 [   33.467760] hub 1-0:1.0: 4 ports detected
 [   33.603981] PM: Adding info for No Bus:usbdev1.1_ep81
 [   33.613013] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller
 (OHCI) Driver
 [   33.613425] PCI: Setting latency timer of device 0000:00:0f.4 to 64
 [   33.613447] ohci_hcd 0000:00:0f.4: OHCI Host Controller
 [   33.660145] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus
 number 2
 [   33.692167] ohci_hcd 0000:00:0f.4: irq 10, io mem 0xfe01a000
 [   33.783182] PM: Adding info for usb:usb2
 [   33.792256] PM: Adding info for No Bus:usbdev2.1_ep00
 [   33.801120] usb usb2: configuration #1 chosen from 1 choice
 [   33.831504] hub_port_wait_reset: portstatus=503 portchange=10
 [   33.861809] PM: Adding info for usb:2-0:1.0
 [   33.870746] hub 2-0:1.0: USB hub found
 [   33.898645] hub 2-0:1.0: 4 ports detected
 [   33.926170] usb 1-1: new high speed USB device using ehci_hcd and
 address 2
 [   34.014613] hub_port_wait_reset: portstatus=503 portchange=10
 [   34.065289] PM: Adding info for No Bus:usbdev2.1_ep81
 [   34.074328] Initializing USB Mass Storage driver...
 [   34.136060] PM: Adding info for usb:1-1
 [   34.136648] PM: Adding info for No Bus:usbdev1.2_ep00
 [   34.145596] usb 1-1: configuration #1 chosen from 1 choice
 [   34.176426] PM: Adding info for usb:1-1:1.0
 [   34.178892] PM: Adding info for No Bus:usbdev1.2_ep02
 [   34.190396] PM: Adding info for No Bus:usbdev1.2_ep83
 [   34.194084] usbcore: registered new interface driver usb-storage
 [   34.224254] USB Mass Storage support registered.
 [   34.271147] usbcore: registered new interface driver libusual
 [   34.318658] PM: Adding info for platform:i8042
 [   34.333218] serio: i8042 KBD port at 0x60,0x64 irq 1
 [   34.362542] PM: Adding info for serio:serio0
 [   34.362727] serio: i8042 AUX port at 0x60,0x64 irq 12
 [   34.391702] PM: Adding info for serio:serio1
 [   34.438407] PM: Adding info for No Bus:rtc0
 [   34.446449] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
 [   34.476394] rtc0: alarms up to one day
 [   34.520563] input: AT Translated Set 2 keyboard as /class/input/input3
 [   34.573225] PM: Adding info for No Bus:i2c-1
 [   34.582346] PM: Adding info for i2c:1-000d
 [   34.582906] Set IRQ 6 for 2
 [   34.610678] PM: Adding info for platform:dcon
 [   34.620084] olpc-dcon: Discovered DCON version 2
 [   34.657651] sdhci: Secure Digital Host Controller Interface driver
 [   34.688000] sdhci: Copyright(c) Pierre Ossman
 [   34.724731] sdhci: SDHCI controller found at 0000:00:0c.1 [11ab:4101]
 (rev 10)
 [   34.755859] PCI: Enabling device 0000:00:0c.1 (0000 -> 0002)
 [   34.785086] sdhci: Invalid iomem size. You may experience problems.
 [   34.815171] PM: Adding info for No Bus:mmc0
 [   34.828023] mmc0: SDHCI at 0xfe024000 irq 11 DMA
 [   34.869928] geode-aes: GEODE AES engine enabled.
 [   34.904610] usbcore: registered new interface driver hiddev
 [   34.937970] usbcore: registered new interface driver usbhid
 [   34.966071] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
 [   34.995101] Advanced Linux Sound Architecture Driver Version 1.0.14
 (Thu May 31 09:03:25 2007 UTC).
 [   35.055926] PM: Adding info for No Bus:timer
 [   35.073782] PCI: Setting latency timer of device 0000:00:0f.3 to 64
 [   35.077529] Failure reading codec reg 0x7e,Last value=0x7e805368
 [   35.107316] Failure reading codec reg 0x7e,Last value=0x7e805368
 [   35.143867] PM: Adding info for No Bus:card0
 [   35.152834] PM: Adding info for No Bus:pcmC0D0p
 [   35.161737] PM: Adding info for No Bus:pcmC0D0c
 [   35.170599] PM: Adding info for ac97:0-0:AD1888
 [   35.179642] PM: Adding info for No Bus:controlC0
 [   35.188585] ALSA device list:
 [   35.214595]   #0: CS5535 Audio cs5535audio at 0x1480, irq 5
 [   35.244094] TCP bic registered
 [   35.270115] Initializing XFRM netlink socket
 [   35.297403] NET: Registered protocol family 1
 [   35.324843] NET: Registered protocol family 10
 [   35.351939] lo: Disabled Privacy Extensions
 [   35.378661] Mobile IPv6
 [   35.403232] NET: Registered protocol family 17
 [   35.429548] Using IPI Shortcut mode
 [   35.455203] Freeing unused kernel memory: 168k freed
 [   35.481852] Write protecting the kernel read-only data: 653k
 [   35.509475] PM: Adding info for No Bus:vcs1
 [   35.518859] PM: Adding info for No Bus:vcsa1
 [   37.200535] olpc-ec:  timeout waiting for EC to quiesce!
 [   37.227697] Failed to clear SCI queue!
 [   41.133241] JFFS2 notice: (592) jffs2_build_xattr_subsystem: complete
 building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of
 xref (0 dead, 0 orphan) found.
 [   42.610499] PM: Removing info for No Bus:vcs1
 [   42.610830] PM: Removing info for No Bus:vcsa1
 [   42.611159] PM: Adding info for No Bus:vcs1
 [   42.611384] PM: Adding info for No Bus:vcsa1
 [   42.611806] PM: Removing info for No Bus:vcs1
 [   42.612030] PM: Removing info for No Bus:vcsa1
 [   42.618699] PM: Adding info for No Bus:vcs1
 [   42.618940] PM: Adding info for No Bus:vcsa1
 [   42.619365] PM: Removing info for No Bus:vcs1
 [   42.619590] PM: Removing info for No Bus:vcsa1
 [   42.619897] PM: Adding info for No Bus:vcs1
 [   42.620123] PM: Adding info for No Bus:vcsa1
 [   42.620695] PM: Removing info for No Bus:vcs1
 [   42.620917] PM: Removing info for No Bus:vcsa1
 [   42.621225] PM: Adding info for No Bus:vcs1
 [   42.621447] PM: Adding info for No Bus:vcsa1
 [   42.644645] PM: Removing info for No Bus:vcs1
 [   42.644882] PM: Removing info for No Bus:vcsa1
 [   42.647071] PM: Adding info for No Bus:vcs1
 [   42.652291] PM: Adding info for No Bus:vcsa1
 [   49.667857] cs5535_gpio: base=0x1000 mask=0xb003c66 major=251
 [   50.108727] drivers/input/mouse/olpc.c: OLPC touchpad revision 0x3c.
 [   50.428619] ieee80211_crypt: registered algorithm 'NULL'
 [   50.448681] ieee80211: 802.11 data/management/control stack, git-1.1.13
 [   50.448707] ieee80211: Copyright (C) 2004-2005 Intel Corporation
 <jketreno at linux.intel.com>
 [   50.528348] PM: Adding info for No Bus:msh0
 [   50.529056] PM: Adding info for No Bus:1-1
 [   50.550680] drivers/input/mouse/olpc.c: OLPC touchpad revision 0x3c.
 [   50.615642] input: OLPC ALPS GlideSensor as /class/input/input4
 [   50.644840] input: OLPC ALPS PenTablet as /class/input/input5
 [   51.446550] PM: Removing info for No Bus:1-1
 [   51.599036] mice: PS/2 mouse device common for all mice
 [   52.321792] PM: Adding info for No Bus:eth0
 [   52.322078] libertas: eth0: Marvell WLAN 802.11 adapter
 [   52.322519] usbcore: registered new interface driver usb8xxx
 [   52.829038] i2c /dev entries driver
 [   52.833423] PM: Adding info for No Bus:i2c-0
 [   52.880982] PM: Adding info for No Bus:i2c-1
 [   55.405472] PM: Removing info for No Bus:vcs1
 [   55.406199] PM: Removing info for No Bus:vcsa1
 [   55.415518] PM: Adding info for No Bus:vcs1
 [   55.415645] PM: Adding info for No Bus:vcsa1
 [   55.415948] PM: Removing info for No Bus:vcs1
 [   55.416050] PM: Removing info for No Bus:vcsa1
 [   55.416238] PM: Adding info for No Bus:vcs1
 [   55.416337] PM: Adding info for No Bus:vcsa1
 [   55.416783] PM: Removing info for No Bus:vcs1
 [   55.416976] PM: Removing info for No Bus:vcsa1
 [   55.417154] PM: Adding info for No Bus:vcs1
 [   55.417255] PM: Adding info for No Bus:vcsa1
 [   55.442089] PM: Removing info for No Bus:vcs1
 [   55.442197] PM: Removing info for No Bus:vcsa1
 [   55.443398] PM: Adding info for No Bus:vcs1
 [   55.443510] PM: Adding info for No Bus:vcsa1
 [   64.984466] ADDRCONF(NETDEV_UP): eth0: link is not ready
 [   66.472400] ADDRCONF(NETDEV_UP): msh0: link is not ready
 [   67.898204] ADDRCONF(NETDEV_CHANGE): msh0: link becomes ready
 [   67.899908] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
 [   69.395351] PM: Adding info for No Bus:vcs2
 [   69.396336] PM: Adding info for No Bus:vcsa2
 [   69.477554] PM: Removing info for No Bus:vcs2
 [   69.478493] PM: Removing info for No Bus:vcsa2
 [   69.484249] PM: Adding info for No Bus:vcs2
 [   69.485089] PM: Adding info for No Bus:vcsa2
 [   70.725045] PM: Adding info for No Bus:vcs3
 [   70.726014] PM: Adding info for No Bus:vcsa3
 [   78.528672] eth0: no IPv6 routers present
 [   78.765935] msh0: no IPv6 routers present
 [  101.198240] ADDRCONF(NETDEV_CHANGE): msh0: link becomes ready
 [  112.149800] msh0: no IPv6 routers present
 [  124.706970] ADDRCONF(NETDEV_CHANGE): msh0: link becomes ready
 [  135.167768] msh0: no IPv6 routers present
 [  144.265420] olpc-ec:  timeout waiting for EC to quiesce!
 [  144.270866] Failed to clear SCI queue!
 [  148.139410] ADDRCONF(NETDEV_CHANGE): msh0: link becomes ready
 [  158.173528] msh0: no IPv6 routers present
 [  171.669812] ADDRCONF(NETDEV_CHANGE): msh0: link becomes ready
 [  171.792559] JFFS2 warning: (1539) jffs2_sum_write_sumnode: Not enough
 space for summary, padsize = -1043
 [  182.248436] msh0: no IPv6 routers present
 [  186.666682] JFFS2 notice: (624) check_node_data: wrong data CRC in data
 node at 0x311ce388: read 0x15d0ca45, calculated 0x41a9f4af.
 [  209.063899] ADDRCONF(NETDEV_CHANGE): msh0: link becomes ready
 [  219.572004] msh0: no IPv6 routers present
 [  230.621311] ADDRCONF(NETDEV_CHANGE): msh0: link becomes ready
 [  248.999974] msh0: no IPv6 routers present

-- 
Ticket URL: <https://dev.laptop.org/ticket/3948#comment:9>
One Laptop Per Child <https://dev.laptop.org>
OLPC bug tracking system



More information about the Bugs mailing list