[Trac #1434] NandFlash of PreB3 can't mount successfully after executing flash_erashall

[Zarro Boogs per Child]

#1434: NandFlash of PreB3 can't mount successfully after executing flash_erashall
--------------------------+-------------------------------------------------
 Reporter:  chiaying.lin  |        Owner:  rsmith 
     Type:  defect        |       Status:  new    
 Priority:  high          |    Milestone:  BTest-3
Component:  kernel        |   Resolution:         
 Keywords:                |  
--------------------------+-------------------------------------------------
Changes (by vance.ke):

 * cc: Elvis.Wu at quantacn.com (added)

Comment:

 Hi.   [[BR]]
 We were using OLPC ext3 build 395 image to boot to system , and it can
 work just after "flash_eraseall -j /dev/mtd0" with '''B2''' boards
 including previous stage boards.  [[BR]]
 But it seems not to work well with '''Pre-B3''' boards.   [[BR]]
 In addition , B2 and PreB3 testing boards were using same BIOS version
 (Q2C09) at that time.  [[BR]]
 So we are confused with that situation. But if it is normal , we might
 ignore the issue.[[BR]] [[BR]]

 Besides , because some procedures are needed at CL1 Manufacturing
 Stage.[[BR]]
 First , we need booting to system by manufactring USB Key (or from
 network). [[BR]]
 Second , we need to erase/format Nand Flash and mount MTD device
 (/dev/mtdblock0). [[BR]]
 Then , we will copy our manufacturing test programs into NAND Flash for
 testing and verifying system in each manufacturing procedure. [[BR]][[BR]]
 Best Regards,[[BR]]
 Vance [[BR]]

-- 
Ticket URL: <http://dev.laptop.org/ticket/1434#comment:3>
One Laptop Per Child <http://laptop.org/>