[Trac #1391] Nandflash selftest failed with SAMSUNG and ST Nandflash on PreB3 Board.
Zarro Boogs per Child
bugtracker at laptop.org
Fri May 4 03:33:50 EDT 2007
#1391: Nandflash selftest failed with SAMSUNG and ST Nandflash on PreB3 Board.
---------------------------------+------------------------------------------
Reporter: chiaying.lin | Owner: wmb at firmworks.com
Type: defect | Status: closed
Priority: normal | Milestone: BTest-3
Component: ofw - open firmware | Resolution: fixed
Keywords: |
---------------------------------+------------------------------------------
Comment (by chiaying.lin):
Attached file is the test screenshot of each Nandflash part on B2,
PreB3.[[BR]]
B2 ==> BIOS: Q2C08h , (Image: 395-ext3).[[BR]]
PreB3==> BIOS : Q2C09 Version (Image: 395-ext3).[[BR]]
Prepare a bootable USB memory key (Image: 395-ext3).[[BR]]
Boot by USB memory key.[[BR]]
Switch to command mode.[[BR]]
#mkdir image [[BR]]
#modprobe mtdchar [[BR]]
#flash_eraseall -j /dev/mtd0 [[BR]]
#modprobe mtdblock [[BR]]
#mount -t jffs2 /dev/mtdblock0 /mnt [[BR]]
#df [[BR]]
->Mount successfully : CL1 B2. (B2_Board_1_ok.jpg)[[BR]]
->Mount gets failure: CL1 PreB3. Nand Flash Parts: [[BR]]
SAMSUNG (B3_Samung_1.jpg) , [[BR]]
ST (B3_ST_1.jpg) , [[BR]]
Hynix (B3_Hynix_1.jpg) , [[BR]]
Marco (With a lot of register messages. B3_Marco_1.jpg) [[BR]]
Insert another USB memory key (With 395 jffs2 image file)[[BR]]
#mount /dev/sdb1 /image [[BR]]
#nandwrite -p /dev/mtd0 /image/395.img[[BR]]
#mount -t jffs2 /dev/mtdblock0 /mnt[[BR]]
#df [[BR]]
->Mount successfully : CL1 B2. (B2_Board_2_ok.jpg)[[BR]]
->Mount successfully CL1 PreB3. Nand Flash Parts: [[BR]]
SAMSUNG (B3_Samung_2.jpg) , [[BR]]
ST (B3_ST_2.jpg) , [[BR]]
Hynix (B3_Hynix_2.jpg) , [[BR]]
Marco (With a lot of register messages. B3_Marco_2.jpg)
--
Ticket URL: <http://dev.laptop.org/ticket/1391#comment:5>
One Laptop Per Child <http://laptop.org/>
More information about the Bugs
mailing list