#1753 LOW Untriag: Build 451, 445, and 444 on ATest board.
Zarro Boogs per Child
bugtracker at laptop.org
Mon Jun 18 16:45:19 EDT 2007
#1753: Build 451, 445, and 444 on ATest board.
--------------------------+-------------------------------------------------
Reporter: hartwellfong | Owner: mlj
Type: defect | Status: new
Priority: low | Milestone: Untriaged
Component: hardware | Version:
Keywords: | Verified: 0
--------------------------+-------------------------------------------------
ATest has Q2C11 firmware. Build 451, 445, and 444 were booted from a 512MB
USB flash key. Not booting from onboard flash because flashing Linux
images have not been successful on this ATest board. However, booting
image from USB flash key works well.
Build 451 (olpc-redhat-stream-development-
build-451-20070608_0733-devel_ext3.img.bz2 ) did not boot. OFW screen
froze. Serial port console gave the following message:
...[[BR]]
[ 16.360798] checking if image is initramfs... it is [[BR]]
[ 16.455171] Freeing initrd memory: 5518k freed [[BR]]
[ 16.462085] SCI is mapped to IRQ 3 [[BR]]
[ 16.465612] Set IRQ 3 for 7 [[BR]]
[ 16.469408] input: Geode PM as /class/input/input0 [[BR]]
[ 16.475625] olpc-pm: Unknown SCI event 0xff occurred! [[BR]]
[ 16.481876] olpc-pm: Unknown SCI event 0xff occurred! [[BR]]
[ 16.488236] olpc-pm: Unknown SCI event 0xff occurred! [[BR]]
...[[BR]]
Okay, get an earlier image to check.
Build 445 (olpc-redhat-stream-development-
build-445-20070607_0436-devel_ext3.img.bz2) did not boot. OFW screen
froze. Serial port console gave the following message:
...[[BR]]
[ 16.380707] checking if image is initramfs... it is [[BR]]
[ 16.471100] Freeing initrd memory: 5518k freed [[BR]]
[ 16.477970] SCI is mapped to IRQ 3 [[BR]]
[ 16.481491] Set IRQ 3 for 7 [[BR]]
[ 16.485302] input: Geode PM as /class/input/input0 [[BR]]
[ 16.491399] olpc-pm: Unknown SCI event 0xff occurred! [[BR]]
[ 16.497654] olpc-pm: Unknown SCI event 0xff occurred! [[BR]]
[ 16.504015] olpc-pm: Unknown SCI event 0xff occurred! [[BR]]
...[[BR]]
Okay, get an earlier image to check.
Build 444 (olpc-redhat-stream-development-
build-444-20070604_2352-devel_ext3.img.bz2) booted. OFW screen did not
froze. Serial port console gave the following message:
...[[BR]]
[ 16.309630] checking if image is initramfs... it is [[BR]]
[ 16.403201] Freeing initrd memory: 5518k freed [[BR]]
[ 16.410094] SCI is mapped to IRQ 3 [[BR]]
[ 16.413613] Set IRQ 3 for 7 [[BR]]
[ 16.417418] input: Geode PM as /class/input/input0 [[BR]]
[ 16.425400] audit: initializing netlink socket (disabled) [[BR]]
[ 16.431107] audit(1182173210.350:1): initialized[[BR]]
[ 16.436545] Total HugeTLB memory allocated, 0 [[BR]]
[ 16.442160] VFS: Disk quotas dquot_6.5.1 [[BR]]
.[[BR]]
.[[BR]]
.[[BR]]
[ 24.911402] sd 0:0:0:0: Attached scsi disk sda [[BR]]
[ 26.242966] kjournald starting. Commit interval 5 seconds [[BR]]
[ 26.279352] EXT3-fs: mounted filesystem with ordered data mode. [[BR]]
[[BR]]
OLPC build 444 (stream development; variant devel_ext3) [[BR]]
Kernel 2.6.21-20070601.1.olpc.0a445cf60976b51 on an i586 [[BR]]
[[BR]]
xo-00-08-F3 login: root [[BR]]
...[[BR]]
(end of serial port console message) [[BR]]
External monitor reported "Video mode not supported".
Solution: Using serial port console, change "1200x900" to "1024x768" in
/etc/X11/xorg.conf and comment out "cp -f /dev/X11/geode-xorg.conf
/etc/X11/xorg.conf" in /etc/init.d/olpc-configure for X-window to start
properly on an external 1024x768 monitor/ATest board.
Sugar, Journal, TamTam, Etoys, TurtleArt, developer console, X-window, and
twm are working. USB mouse, USB keyboard, serial port console, and ALSA
sound are working. Noticed that Etoys has a new scale mode which is useful
for readjusting for 1024x768. TurtleArt is new (as it is not present in
Build 406).
This ATest board with 5V transformer consumes ~6W.
--
Ticket URL: <http://dev.laptop.org/ticket/1753>
One Laptop Per Child <http://laptop.org/>
More information about the Bugs
mailing list