#2371 NORM Untriag: Autoinstalling from SD fails on B1 with build 528
Zarro Boogs per Child
bugtracker at laptop.org
Sat Jul 21 19:52:48 EDT 2007
#2371: Autoinstalling from SD fails on B1 with build 528
---------------------------------+------------------------------------------
Reporter: gnu | Owner: wmb at firmworks.com
Type: defect | Status: new
Priority: normal | Milestone: Untriaged
Component: ofw - open firmware | Version: Q2C18
Keywords: | Verified: 0
---------------------------------+------------------------------------------
I followed "Autoinstallation" very carefully, unzipping and writing the
relevant files for Build 528 onto an 8MB SDHC card. I then moved the SD
card to the B1, and powered it on, holding down the "X" game key because
it already runs Q2C18. When I release the game key, the system goes
through a 3-second countdown, then I see the SD-card logo, then the XO
logo. I see these error messages, which quickly scroll off the screen
after it starts booting the kernel from the NAND:
Error: ISR=8002 ESR = 40 Data End Bit,
First time there were more messages. One was like above. But they went
by too fast to catch.
I powered off in mid-kernel-boot and reran the power-on. Second time just
the one message above (then a boot from NAND). I powered off while
waiting for udev to waste time. Third time was more interesting:
{{{
Type the Esc key to interrupt automatic startup
Boot device: /sd/disk:\boot\olpc.fth Arguments:
Checking existing OS image on NAND FLASH
Existing OS build is 515 .0
Error: ISR = 8002 ESR = 40 Data End Bit,
Stopping
Can't read directory
NAND image is already current; skipping update
Existing firmware version is q2c18
Error: ISR = 8002 ESR = 40 Data End Bit,
Stopping
Can't read directory
Firmware is already current; skipping update
Error: ISR = 8002 ESR = 40 Data End Bit,
Stopping
fffffffe Type 'help' for more information.
ok
}}}
--
Ticket URL: <https://dev.laptop.org/ticket/2371>
One Laptop Per Child <http://laptop.org/>
More information about the Bugs
mailing list