[Trac #1299] q2c01 firmware doesn't boot Linux by default

[Zarro Boogs per Child]

#1299: q2c01 firmware doesn't boot Linux by default
---------------------------------+------------------------------------------
 Reporter:  gnu                  |       Owner:  wmb at firmworks.com
     Type:  defect               |      Status:  new              
 Priority:  normal               |   Milestone:  Untriaged        
Component:  ofw - open firmware  |    Keywords:                   
---------------------------------+------------------------------------------
 Installed Q2C01 firmware via "flash" command.  It powered off.  Powered
 on.  Got:
 {{{
 OLPC B2, 128 MB memory installed
 OpenFirmware  CL1   Q2C01  Q2C

 Interactive boot
 Keyboard probe
 USB probe
 USB2 devices:
 /pci/usb at f,5/wlan at 3,0
 /pci/usb at f,5/scsi at 1,0
 /pci/usb at f,5/scsi at 1,0/disk
 USB1 devices:
 Type any key to interrupt automatic startup
 Type 'help' for more information.

 ok
 }}}
 It didn't even try to boot.

 The same is true if I remove the USB key from the unit and power cycle it.
 No attempt to boot.

 It does work when I type `boot` to the `ok` prompt.

-- 
Ticket URL: <http://dev.laptop.org/ticket/1299>
One Laptop Per Child <http://laptop.org/>