[Trac #495] protective film left on LCD in B1 build

[Zarro Boogs per Child]

#495: protective film left on LCD in B1 build
----------------------------------------------+-----------------------------
 Reporter:  mlj                               |        Owner:  mlj     
     Type:  defect                            |       Status:  assigned
 Priority:  normal                            |    Milestone:  BTest-2 
Component:  display                           |   Resolution:          
 Keywords:  display protective-film assembly  |  
----------------------------------------------+-----------------------------
Comment (by jg):

 Every single unit has the protective film still on the polarizer, they
 were not removed by Quanta (we can get this next time!).  You can take off
 your protective film, carefully, it's only 4 screws - all on the bottom of
 the brick (the brick is the LCD - motherboard assembly), you have rotate
 the brick to the left, unscrew the two screws that you can get to (philips
 head), and then rotate to the right and get the other two screws.

 Next take off the left and right short green things (part of the "bumper),
 and then take off the plastic face plate over the LCD.  Now you can peel
 the thin protective layer of plastic off the polarizer.

 SEPARATE SUBJECT (and not really for bug-trac - but for your knowledge):
 the polarizer surface isn't rough as it should be to give anti-glare, this
 is being addressed and can hopefully hit the B2 build, but if not it will
 hit B3.  Mary Lou has an initial sample on her laptop that has been
 retrofitted. This will eliminate the very slight "mirror" like effect in
 certain, non-diffuse, lighting.

 - Mary Lou

-- 
Ticket URL: <http://dev.laptop.org/ticket/495#comment:2>
One Laptop Per Child <http://laptop.org/>