[Trac #143] olpcflash verify fails with "SST" flash part

[Zarro Boogs per Child]

#143: olpcflash verify fails with "SST" flash part
----------------------+-----------------------------------------------------
 Reporter:  cjb       |        Owner:  wmb at firmworks.com
     Type:  defect    |       Status:  assigned         
 Priority:  high      |    Milestone:  BTest-2          
Component:  hardware  |   Resolution:                   
 Keywords:            |  
----------------------+-----------------------------------------------------
Changes (by wmb at firmworks.com):

  * owner:  rsmith => wmb at firmworks.com
  * status:  new => assigned

Comment:

 The firmware "flash" command successfully programs the SST part on A-test
 boards, both in the native mode (i.e. when "flash" is programming the part
 on the board that OFW is running on) and also in the serial mode (when
 "flash" is running on one board, reprogramming a second board over the
 serial recovery channel).  We have verified this on both of the SST-
 equipped A-test boards that Richard has.

-- 
Ticket URL: <http://dev.laptop.org/ticket/143#comment:6>
One Laptop Per Child <http://laptop.org/>